rumproast789

oh crap, sorry. 44" width, 17" height, 27" depth. 7cb ft internally. Built with 3/4" MDF wood.

which post are you referring to if you don't mind me asking?

I didn't know where to post this, but since I would be pairing it with a BTL, I posted it here but okay. I am still deciding on an amp. I was looking at a PA Bamf 5500d but I heard it really only will put out about 1500 watts at one ohm. So if thats true my better choices are the AQ2200d, and the Rockford Fosgate t2000 I notice everywhere that the RF runs for about 600-800$. At this fleamarket called Gibralter up here in Michigan, one of the guy says he'll sell it to me for 450$ So 280-300$ for the PA, 389$ for the AQ2200d, and supposedly 450$ for the RF 2000 What do you all think would be the best choice?

I tried searching on two sites and couldnt find it, but what does running at full tilt mean? Like blaring the volume all the way almost (3/4ths give or take) or turning the phase all the way to 180 or whatever? I dont know why I thought so, but I've always thought it was turning hte phase up...

sounds good, i can do that. It sounded fine in the middle, but my bro was saying it sounded like it wasn't hitting right after i set it to 0. I'll change while playing and see. I set my subsonic to a little bit higher than 15hz, i was hoping for around 20-25, couldn't be for sure tho (Why do amp makers do that?) I set my LPF to hopefully around 80hz, yet again, can't see exactly which is gay.

How about this, somone buy my computer, and I buy the SAZ 2000? lol.?

So since i have sub up port forward (towards the trunk, right?) i would put it at 90? I thought it was the reversing polarity also but couldnt think of what I wanted to say. and how would I go about setting it? Do i just sit in my drivers seat and have someone turn hte knob until it sounds good? or just to what I'm liking, correct?

Oh we must have a miscommunication lol. After you answered what full tilt was, I asked what does phase do lol.

what does it do?

ah okay. So then whats the point of the phase? should I just keep it at 0?

I don't have the money for one, but if I do by the time its going to start, I WILL be buying one. I'm not voting because I doubt I'll have the money for it if it starts soon which really dissapoints me

does that work with an iPod touch?

Dont recall exact specs, Im sure Dylan or Duran can comment on that. On the length, did you mean port length, or depth of the box? You can say both if you want, but I just meant the depth of the box. Used the customers max dims to get the proper air space needed. Of courses, the long port is to get proper tuning. phh dur lol. I wasnt thinking about max dimensions.

Dont recall exact specs, Im sure Dylan or Duran can comment on that. On the length, did you mean port length, or depth of the box? You can say both if you want, but I just meant the depth of the box.

Oh man.... that will POUND Vids when its done and playing duran...

what subs are going in it? what are the specs? Looks awesome, any specific reason you went with a very long length?

1 ohm has less resistance than 2 or 4 ohms, so it would be easier to produce more power, therefore with more power it would be louder. Correct me if I'm wrong.

hey sorry to go off topic, what does your friends 6000 watt system consist of? But yeah, idk all I know is that you would have to be VERY careful powering doulbe the rated power to each sub. I know it can be done but you better have a perfectly clean signal, and a pretty thoughout sized enclosure.

Alright well I added an amp to my car for testing. I unplugged the battery and had to plug it back in and when I tried to start it, it had troubles starting because of the disconnectoin of the battery. So When I went to start it I also tried to put a cd in. The cd was just sitting half way in so while I tried to start it again and just pushed the cd in. The cd player will not read it, and it cannot eject it becuase it doesn't see it as it's in there. It is a 2002 ford explorer, and it is the regular (not 6 disc) cd changer. I read to either grab it with plyers (can't find needle nose small enough) or take it out. I don't know how to take it out either so can someone help!

http://www.sonicelectronix.com/item_16354_...al+KD-A305.html I think I will get this to replace my stock headunit. RCA for the subwoofer stage, and 5v preouts. Looks fairly easy to use. Aux input from the ipod, I'll have to buy the ipod adapter another day.... What do you guys think of it.?

wow this will be cool. I thought 18's would be tooo big to fit for a blow through properly...

What year explorer is it? JW

by soldering? I have a friend with some like burnt/ broken tinsels at the end at the speaker terminal and I would just like to know

I'd say go with Fi, I've never heard of Addictive Audio but they don't seem tooo bad. It will be an expensive system, but your paying 1000$ for Addictive audio, and you would pay 1000$ for Fi (2 18 BTL) I would rather go with that. Just my opinion

Whatever you say. I looked on addictive audios website and it said they were 1000 rms for their top sub, and they didnt come in 18? lol. I must have looked at the wrong thing.