rumproast789
-
Content Count
255 -
Joined
-
Last visited
Posts posted by rumproast789
-
-
which post are you referring to if you don't mind me asking?
0 -
sounds good, i can do that. It sounded fine in the middle, but my bro was saying it sounded like it wasn't hitting right after i set it to 0. I'll change while playing and see.
I set my subsonic to a little bit higher than 15hz, i was hoping for around 20-25, couldn't be for sure tho (Why do amp makers do that?)
I set my LPF to hopefully around 80hz, yet again, can't see exactly which is gay.
0 -
How about this, somone buy my computer, and I buy the SAZ 2000? lol.?
0 -
Phase is used to make your subwoofer play a certain note before your front speakers, so that the sound waves from all your speakers get to your ears at the same time.So since i have sub up port forward (towards the trunk, right?) i would put it at 90? I thought it was the reversing polarity also but couldnt think of what I wanted to say.
and how would I go about setting it? Do i just sit in my drivers seat and have someone turn hte knob until it sounds good? or just to what I'm liking, correct?
0 -
It's just referring to the loudest volume you listen to your radio at.It doesn't DO anything.
Oh we must have a miscommunication lol. After you answered what full tilt was, I asked what does phase do lol.
0 -
What is your question about it?what does it do?
0 -
ah okay. So then whats the point of the phase? should I just keep it at 0?
0 -
I tried searching on two sites and couldnt find it, but what does running at full tilt mean?
Like blaring the volume all the way almost (3/4ths give or take)
or
turning the phase all the way to 180 or whatever? I dont know why I thought so, but I've always thought it was turning hte phase up...
0 -
I don't have the money for one, but if I do by the time its going to start, I WILL be buying one. I'm not voting because I doubt I'll have the money for it if it starts soon which really dissapoints me
0 -
http://www.sonicelectronix.com/item_11105_...EH-P500UB.html#New one im thinking of getting, comes with free mounting dash kit for your vehicle and wiring harness.
Pretty cheap too
does that work with an iPod touch?
0 -
what subs are going in it? what are the specs? Looks awesome, any specific reason you went with a very long length?Dont recall exact specs, Im sure Dylan or Duran can comment on that. On the length, did you mean port length, or depth of the box?
You can say both if you want, but I just meant the depth of the box.
Used the customers max dims to get the proper air space needed. Of courses, the long port is to get proper tuning.
phh dur lol. I wasnt thinking about max dimensions.
0 -
what subs are going in it? what are the specs? Looks awesome, any specific reason you went with a very long length?Dont recall exact specs, Im sure Dylan or Duran can comment on that. On the length, did you mean port length, or depth of the box?
You can say both if you want, but I just meant the depth of the box.
0 -
2 Nightshade 12'sOh man.... that will POUND
Vids when its done and playing duran...
0 -
what subs are going in it? what are the specs? Looks awesome, any specific reason you went with a very long length?
0 -
1 ohm has less resistance than 2 or 4 ohms, so it would be easier to produce more power, therefore with more power it would be louder.
Correct me if I'm wrong.
0 -
hey sorry to go off topic, what does your friends 6000 watt system consist of?
But yeah, idk all I know is that you would have to be VERY careful powering doulbe the rated power to each sub. I know it can be done but you better have a perfectly clean signal, and a pretty thoughout sized enclosure.
0 -
wow this will be cool. I thought 18's would be tooo big to fit for a blow through properly...
0 -
What year explorer is it? JW
0 -
If the Tinsels are in plain view (ie, not in the spiders) you can fix it yourself with out a recone.by soldering? I have a friend with some like burnt/ broken tinsels at the end at the speaker terminal and I would just like to know
0 -
I'd say go with Fi, I've never heard of Addictive Audio but they don't seem tooo bad.
It will be an expensive system, but your paying 1000$ for Addictive audio, and you would pay 1000$ for Fi (2 18 BTL) I would rather go with that. Just my opinion
0 -
Whatever you say. I looked on addictive audios website and it said they were 1000 rms for their top sub, and they didnt come in 18? lol. I must have looked at the wrong thing.
0 -
i need to get a job so i can afford this pre sale price. I seriously want one but wouldnt be able to buy it for 600+
sounds like it will be a great product
0 -
Fi BTL 18". Have you ever herad a true 4000-5000 watt system? Or do you want 4000-5000 watt each sub? THe btls are rated at 2k rms each also... It will get insanely loud
0 -
http://www.sonicelectronix.com/item_16354_...al+KD-A305.html
I think I will get this to replace my stock headunit. RCA for the subwoofer stage, and 5v preouts. Looks fairly easy to use. Aux input from the ipod, I'll have to buy the ipod adapter another day....
What do you guys think of it.?
0
I messed up my port...
in SPL & SQ / Fabrication
Posted
Alright, so I messed up on my port. The port it skinnier and longer instead of wider and shorter. I have a BTL, and whenever it plays the lows, I feel like its not hitting them as hard as it should sometimes. I guess I don't know how its supposed to hit in the 30hz - 38 hz region. People say songs like Juice box will hit hard, and it barely hits hard for me it seems like... Same goes for some other low songs.
Here is a pic of the port in the box:
Here is the port that should be 33hz:
Here is the port now (the 21" measurement comes from the 22", I had to cut an 1" off to get it to equal the port opening on the back of the box):
Could someone tell me what this tuning would be?