mrray13

last couple for my post whoring tonite.... the visonic luv...... wheeeeeeeeeeeeeeeeeeee

last one of the wrx... wheeeeeeeeeeeeeeeeeeeeeee

yep...still the wrx..... wheeeeeeeeeeeeeeeeeeee

same car...... wheeeeeeeeeeeeeeeeeeeeee

a sweet wrx.... love the h/u in the gauge pod..and the screeen where the h/u should have been....also the carbon fibre... wheeeeeeeeeeeeeeeeeeeeeeeeeee

same car..... wheeeeeeeeeeeeeeeeee

a w7 subbed...bd 1501d (x2) powered accord? he barely broke 140db's with two bd's, two 13w7's sealed, two extra yellow tops and two 5 farad caps.....something had to be wrong.... wheeeeeeeeeeeeeeeeeeeeee

thnx denim...nice to see someone cares anyway..hehe...here's a few more pics..... my score sheet....... wheeeeeeeeeeeeeeeeeeee

what steve said.... wheeeeeeeeeeeeeeeeeeeeeeee man, my feet stink :thud:

nasty,sic porn!!! i love it!! wheeeeeeeeeeeeeeeeeeeee

the visionic luv..... wheeeeeeeeeeeeeeeeeeeeeeeeeee

just got back.....here is the low down that termlab is tough!! loudest score of the day..159.9 in a chevy luv with 4 visionic 4000watt amps, about 24 battery's and 2 15" dd's me...i finished first in my class with a 145.5...second place being 6db's behind me i'll post some pics tomorrow nite or so....anyway, here's a few to satisfy the urge.... wheeeeeeeeeeeeeeeeeeeeeeeeee me afterwards w/ trophy

welp.... the truck is tuned, the high amp undone and the battery and cap(yeah, i know) are fully charged...and i'm fixing to walk out the door to go see how loud i am....... i'll let y'all know how i did later.... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

good job!! man, i want a crx... i hope that they aren't using the new termlab today.. wheeeeeeeeeeeeeeeeeeeeeeee

ok Screws equal better? You just said you only have to clamp. So why predrill and then screw and spend money on screws when you can just staple? And yes you can send staples threw 1". I have done it. I Run 120 psi into my gun that shoots up to 1 3/4 staples. And it sinks them. So now why are screws better? I think will already covered all the bases here but for your benefit, i'll do it again. 1. I don't have a pnumatic staple gun. Even if i did, i'd still probably use the screws for the simple fact that I like the way it looks and when building a custom product for a customer, speed isn't a high priority. I'm not working on an assembly line here and if it takes me an extra half hour to screw the damn thing together, so be it. I'd probably just use that extra half hour for cigarette smoking and beer drinking anyway. 2. In my experience with pnumatic staplers, its easier even for a pro to split the wood. you can put a screw in slowly if it's close to an edge to avoid splitting or draw it back out halfway thru if it acts like its gonna split. you have no such luxury with a 120PSI pnumatic stapler. you either get it right the first time or cut a new piece of wood. when i screw boxes together, i can also testfit the pieces before I glue them together, then back the screws out and apply the glue one piece at a time to avoid using clamps all together. 3. I like screws better. Neener neener neener. you are right but money is time and time is in efficency. also you dont have to staple so close to the edges. And for a custom box who wants to see the screws anyway? carpet.....it covers the screws..hehe but for real...i'm with gnome here...it may take longer, but screws (with a good glue) just give a person the impression that they won't fail. whereas staples(brads, whatever) even with a glue, just don't seem as sturdy...and after a while, will fatigue enough to let ur box fall apart. to peavybassist....i won't just glue a box together for anything more then 8's, unless u aren't sending any power. most glue manufactorers even say so right on the bottle and i gotta get gnome's back on something else....the prefit before glue.....when using screws u have that luxury, and it helps to make sure u cut everything right the first time... well, that's my two centz....hehe...now we need some pics of some glue and screws..... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

vette's rule!! and those in ur pics are wayyyyyyyyy sweet! i love the red c4 and the 67 rag...AWESOME!!! thanks for the pics...if only i could judge a vette show...MAN...i'll be daydreamin all day! wheeeeeeeeeeeeeeeeeeeeeeee

true..u could always t-tap into speaker wires and add a line out convertor.... so for $300...a magnum 12d2...and a hifonics 500d....and a line out convertor well, he should be real close to the $300..... wheeeeeeeeeeeeeeeeeeeee

i'd just buy a harness to replace the h/u...then it's just plug and play.... but kickin is right..start with the h/u for the $300...u'll notice a definite improvment over factory...then budget another $300-$400 later for a good sub amp and sub...though with that kind of budget, don't expect to set world records, but u will sound real good with a quality sub and amp..and it can be done for that. wheeeeeeeeeeeeeeeeeeeee:slayer:

my head hurts....................... :thud: but a whole lot of good info!! wheeeeeeeeeeeeeeeeeeeeeee

u can squeeze 42" between the fenders..if ya push..heheh...but 41" will drop in.... it is inded 16.5" to the window line...so with cover, 15.5" max 36" deep is pretty darn close..(damn denim..u was close!!) about 11 cubes net before sub and port displacement.... the mtx box i have picutered in the sub section is 42 wide x 15.5 tall x 16.75 deep and it fits between the fenders (tightly, we had to push it down) and beneath the cover...but it does take up more then half the cargo area.... hope that helps...... wheeeeeeeeeeeeeeeeeeeeeeeee

some pics of the box i just finished..it's the one in the background of my previous pics..... from the top.... i know it's kinda hard to read, it's my first try at embossing..... but it says.. ryanSdime wheeeeeeeeeeeeeeeeeeeeeee

one more for now.... this one is a close up of the id spl and the fishman grill... i still have two amp racks to make and wiring to do, the racks will go whrer the jump seats are and they will be hifonics 1500d and either zx4000 or 6000...he doesn't know yet(i'm not sure about those numbers either) anyway, let me know what ya think......later wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

another..... kinda post whoring eh???? anyway, this one facing ya from my truck's bed

and another.... on my tailgate...yep, i turned the camera sideways and i'm to lazy to ps it back..heheh...deal with it wheeeeeeeeeeeeeeeeeeeeeeeeeee

another.. inside the s10 wheeeeeeeeeeeeeeeeeeeeeeeeee