*ace*
-
Content Count
4 -
Joined
-
Last visited
Posts posted by *ace*
-
-
Currently my plans are to go with a 12" PG Titanium Elite 12" with a PG RSD1200 amp. The setup would be ported, probably 2.5cf tuned to 30-32Hz. But I'm afraid that it migh not be enough. I want something that makes it hard to take a breath at full tilt or makes my vision blurry. Can a ported 12" do this with only 1200 rms? I drive a 2008 Hyundai accent so there's not a lot of room. I could do a 15" but it would HAVE to be sealed.
What would you go with? A ported 12" or a sealed 15"?
0 -
Specs:Qt: .379
Qe .415
Qm: 4.38
Fs: 29.6 Hz
Re: 3.72
Le: 4.6
Vas: 147.2
Mms: 277 g
Cms: 103.4
BL: 21.5
SPL: 91.5 dB (1W/1M)
Power handling will be rated at ~650 watts RMS (but it will handle more, as you know).
Recommended enclosure sizes are 2 cubic feet sealed and 4 cubic feet tuned to 28 Hz vented.
'Not sure about the XXX because I haven't heard one.
What is the X-Max and SD?
0 -
Hey,must say I'm impressed so far with this forum.Nice look to it.Also must say,a lot of good,helpful info.Over at SD all you'll ever find is sarcasism(sp),and smartasses <_< It's nice to be able to go to a forum and not worry about saying the wrong thing.Also like the smilies.Nice big selection :boink: Awesome Forum
0
What enclosure for 15" SSD w/ copper coils?
in Fi Technical
Posted
Basically I'm stuck between two designs. The first one is 4.3cf with a 6" flared aeroport tuned to 35Hz. The second enclosure is 3.5cf tuned to 32Hz using a slot port, with 54" of square port. The power is 1000 watts rms at 1 ohm.