realmofexcursion

do you think i might need to cut down on air space?

^^ Low and loud daily.

why would you use that much port area? just wondering forgot to mention, when i talked to jacob, i think, from sundown, he suggested those numbers

this is my plan. im building a box that has 4 nightshade 15s. i designed the box on a 3d program to scale. the box is 19.5 cubes. the port is 7inches wide and 38.5 inches tall. that gives me 269.5^2 inches of port area and i need 12-16^2 inches of port area for each cube of airspace. so ill make the port area requirement. the box is tuned to 30hz. i will also be having all the walls 1.5inches thick. everything will be liguid nailed and screwed together.what you guys think? i cant seem to get the pictures to upload. i dont know how to get it from google sketchup to a image hosting site. any help with this?

im about to be building a pretty big box that will be housing some serious drivers. i wanted to know which one would be the best option, nails or screws? ive always finished nailed all my boxes together but i also put liquid nail on everyone of them. the walls of this sub box will be 1.5" thick. so would it be best to screw them together? i just hate how long it takes to screw it all, thats why i prefer nails

ill just go ahead with the 15s then. what do you think i should do with the amps? maybe get 2 3500s? or should i go with 4 saz1500s and strap them to 1ohm?

well guys, new option. i just found out that i can purchase 4 nightshade 15s. would that put up more numbers then the 2 18s? i know i would a good bit of amps, but i just sold all 3 of my quads today. so i should be good.

i really want to run the saz3500s. only reason im going to be spending this much money on audio, is because i was forced to sell my racing quads because of a shoulder injury. i forgot to mention, i plan on making the walls of the box 1.5 inch

thats what i was thinking, just need some help with it. does anybody know the weight of one of these? when i start building this box, i want to have something that will support the weight of the sub when i mount it.

i know both of the subs i want are really good. i just dont know what subs i want yet. its either going to be between the ssa xcon 18s or the sundown 18s. im going for more spl then anything. which one would put up more numbers? this is what i plan on doing to my truck no matter what. i already have the entire cab sound deadened. i have 4 super big interstate batteries to power everything, big 3, dual alts. so which one would be the best option for me?

your a life saver, thanks

does anybody know where i can find some? ive been searching for a little while now for downloads, but i cant seem to find them. any help is greatly appreciated.

ok. i think i might have the box ready to go with all the deminsions. i play on putting 2 sundown nightshade 18s in my truck. i was told it need 12^2-16^2 inches of port area. so the box i came up with is 11.5 cubes, with a a port that is 33 inches tall and 5.5 inches wide, this will give me 181.5^2 inches of port area and i need 184 with the box size. its going to be tuned to 30hz. will this work out to be a good box? or do i need to do something different, just let me know

im sorry guys, i totally forgot i need the port area for the size box, dont know what i was thinking. thanks, but as far as the box goes, is 14^2 a bit to big for the 18s?

seeing as i finally decided i want to wall off my truck, i need a few opinions and specs. i was wanting to know if a 14^3 box would be to big for 2 18s. i want the box tuned super low, and i've already done some calculations, and with a 14^3 box and the 4" ports i already have made. it would tune the box to 22-23hz. so the other thing i need to know, is what do one of these subs require for port area. with 6 4" ports, i have around 75^2 inches of port area. would this be enough? or do i need to go with bigger ports?