Leaderboard

IT will probaly be a 250 amp fuse and my next question is do i run the oga from my disturbution blocks into the amp or what and do they make something that u can fit oga into a 4ga amp. and i dont know what u mean when u say reducing i assume u mean that run the 0ga from the front of the car to the battery in the back of the car thanks for all of everyones help yeah run 0 from front to the back batt then run either a piece of 0 to your block to reduce it to 4 ga on the out to the amps or just run a piece of 4 ga to the amps off the battery, but definitely 0 ga from the front. safety wise it is good to have fusing before and after your back battery. don't know if you have it that way already.

What kind of music do you listen to ? BTL and Xcon are not made for the same goal. What are you looking for? You have enogh power for 2 Xcon : that setup should be great (for me! I don't know if it would be good for you!!). I can't tell you nothing on the Nightshades : never heared them. Anyway, it seems that you're going to be LOUD !!! Good luck

I recently did a Cadillac Escalade ESV for a buddy of mine with (2) Fi BL 18's with the flatwound coil and cooling option. Built the box to 14.63 cubic feet with the port tuned to 33 hertz. Wrapped it in vinyl to match the interior of the vehicle and did a big "Fi" logo on the back of the box (notice the logo is an "innie", not an "outie".The amp, for now, is a Hifonics BXI2010D that puts out 1752 watts RMS. I will be swapped with a Rockford Fosgate T40001bd eventually. Built to be a daily driver. Here it is: Sounds great. Real nice quality and it really hits the lows nice, but it just isn't near as loud as it could be with the right amount of power going to it.Even still it beats pretty nice.Shakes the whole dash up and down and can hear it coming about 150 yards away.