Leaderboard

Super legit seller! Bougbt the Fi SSD 18 he had for sale and from the start there was great communication. Shipped immediately and VERY secure! Better than Fi's packaging. Wouldnthesitate to deal with again!

Production on the X series is wrapping up; photos below! Production T/S spec will be coming in soon as well -- likely before the end of this week. Z v.4 production should complete fairly soon as well; we had some delay on the voice coils as the flat wire is imported from Denmark for those coils. Either way X and Z v.4 ETA should be within a few weeks of the original end of June time frame. ---------- Photos of the packaging inside of each directory; those images are pretty large (3MB each) so I didn't link them direct in the post. ---------- X-10 : Index of /misc/protos/X_Series_1250/Production Photos/X10 ----- X-12 : Index of /misc/protos/X_Series_1250/Production Photos/X12 ----- X-15 : Index of /misc/protos/X_Series_1250/Production Photos/X15 ----- X-18 : Index of /misc/protos/X_Series_1250/Production Photos/X18

As usual

It's a Sean Belanger project. That's enough reason for me to stay away from it.

no interest, sorry.

There's visual reference..pictures i've posted before in some thread..somewhere.. "How its made" did a thing on how speakers are made if you want a video format.

Based on this post, you need to research how loudspeakers work.No, they won't make a video. There are trade secrets involved in the build process.

Sencheezy had around 130 for one SSA evil 18 if that helps you out any. Zcon is the next line down

Haven't ever timed it..definitely not going to make a video of it as there's way too many ancient secrets there. Bar stock has to be cut for poles, poles go for a ride in the lathes for the OD and chamfer, if they have cooling then they go into the CNC for the cooling channels to be machined into them, then they're ground, then they go into the tumbler to clean any burrs off which preps the surface for paint, then they're cleaned, painted, then they sit for assembly. Top plates are pulled from raw forgings and turned down on the lathes, ID, OD, and then on the tracer lathe to get the profile that's desired, same thing with the back plates. Top plates are all cnc machined as well then all of the holes are tapped for the basket to mount to it. Then they're all tumbled, painted, baked etc. From there magnets are sorted for size and quantity, bonded together, then the motors are assembled..after that baskets are put on the motors, soft parts are dropped in, magnetized, then they dry and are tested/cleaned/packed. It's very time consuming, and yes it's far easier to order parts from overseas and import everything..it's just not our style simply because anybody can do that, look around .

Wow. If someone came and to sell you a subwoofer and just took your money and walked out, then what? I think it is completely absurd, I wouldn't want to kill someone over any physical item... However lets say it was a man and you tackled him chasing him down. When he landed he went temple first into a curb. You didn't try to kill that dude. Technically the crime was theft, prostitution doesn't even to come into play dice he never got fucked. Legally this is a just ruling. It doesn't really feel good, and is maybe not so "ethical" however. You're changing the situation. I wouldn't shoot someone because they "stole" $150.00 from me. He could have easily gotten his money back without shooting her. you sound so sure? explain ? how do you know she didnt have a knife? or her pussy ass pimp was not outside with a gun but left when he heard the gun shots? how do you get money back from shady hookers?

you can not like my opinion if you want... it is what it is. and thats why she went there was to fuck him... well to make him think so and rob him.

well i didnt mean she deserved to die, or be shot in the neck.. but she was robbing the man in his home... regardless of what it was.. he was getting robbed in his home.. she did not deserve to die over it with that said.... with all things being different.. hooker aside, if someone come in my house and trys to rob me ill shoot them in the face....

she tried to rob him.. fuck her.

I dont work there, but.. Most companies have monthly reports that they base there production off of. Now you can break that down even more and say that their are companies that buy in bulk and keep supplies in house and there are companies that have supplies delivered weekly, monthy or by order.( I forget the marketing term) So usually based off of past monthly reports they know what to expect and keep a minimum of supplies as to not use up all of there monies on products not in the budget. And and on the topic of budget most companies have some type of yearly goal, broken down monthly. so for instance if i have 1000$ and know for sure that i will need 5 subs made that cost 400$, payroll is 200$, that leaves me with 400$ in the bank. It would make no since for me to make 2 more subs that i dont know for sure will sale that month and leaving the company broke. Rather since they build to order and you pay up, it keeps there production going. The problems arise when there are budget problem or orders spike that they didn't forsee. Kinda like in the winter parts store know to stock up on de-icer and scrapers, while in the summer they stock up on AC recharges, but battery sales may stay constant all yr long. I hope that made since i never really get a chance to use my business knowledge lol

i had to

this is true,. there has been a long list..... lol 16K used to do this shit to me when he was a noob here... he grew out it im just too blunt. i have tried to dial back my assholeness

Did they change the email address for resetting the password? its linked to an account i made in 04 i cant remember the password or the security questions.

its all subjective tho.. i say this because there are twins here in texas that hold plenty of records in usaci SPL and they run tiny ports compared to the "rules of thumb" system

I saw the way his is setup. I am not cutting my doors more than they already are. He has two sets in the doors. Gonna have to find something else. I wish I could find an 8 inch sub that could extend to around 700hz lol. Or a midrange that would fill the gap between an 8" sub and the tweets but also be able to blend well with the output of the others.