Maggotpuffin

I dont care if they are components or coaxials but im getting a sundown sax50.4 but i need door speakers ill take any suggestions the amp does 50 per 4 at 4 ohms or 80 per 4 at 2 ohms. Im trying not to spend more than 100 maybe 125 including shipping. All input is welcome thanks

Ok but the 1200 isnt going to be 250 anymore. But alright i need a mids highs amp anyways

So what do you think do you think it will be worth it or should i just buy a saz50.4

And whats lmo and ftW

Imo I think you get more from the Sundown. Plus it is on sale. If your serious about getting a new amp, now is the time to jump on this deal. Here is some testing results ... Sundown FTW! more what besides power?

Imo I think you get more from the Sundown. Plus it is on sale. If your serious about getting a new amp, now is the time to jump on this deal. Here is some testing results ... Sundown FTW! more what besides power?

Ok thanks i just did my big 3 and my lights dont dim now with my kx1200.1 and i have the gain up about 3/4 of the way. Do you think the sae1200d will do fine if i have too ill get a second battery. Would going from my kx1200.1 to the sae 1200d be worth it?

Im thinking about preordering the SAE1200D to replace my Kx1200.1. Is Sundown a better made amp? Could i please get pros and cons of Sundown amps. I also heard that Sundowns draw less amps then Kickers is that true

Ok why are they bad though

Is it a good amp? Pros? Cons?

Ok thanks jay cee youve been alot of help

Ok so another battery negative to ground? But do it to the chassis instead of the stock ground like the 1st battery negative to ground? Why jw

I started my big 3 today. I did my battery to ground before my voltage dropped as low as 11 volts and now its steady around 12 volts. Im gonna do my alternator to battery positive and alternator case to battery negative. Thats what i thought was a second battery ground its actually the ground from my alternators case. And i wired my amp with 0 gauge 2. So hopefully ill get better voltage from the rest of my big 3

Ok i got a good deal on ground and power distro blocks. Ill get em

My amp has 4 gauge power and ground terminals would it be bad to trim the wire or should i just buy power and ground distribution blocks?

My amp has 4 gauge power and ground terminals would it be bad to trim the wire or should i just buy power and ground distribution blocks?

Ok thanks yall why does my battery ground to the block and frame?

Yea alright thanks. I got my knukoncepts wiring today its really thick!!! I gotta do my big 3 when i get to it. Can i do one piece at a time?

Thank you ill look

Yea i know add but should i add both where do u think the stock engine ground is?

Im getting 2 amp kits from knukonceptz. They are both 0 gauge. One is for my amp wiring and one is for my big 3. One of my questions is when my battery grounds it grouds to the frame and the block. Do i need to replace both? And where should i look for my block ground. Btw i drive a 2004 Isuzu Rodeo 3.5 liter. I run a kicker kx1200.1 and its pushing a kicker L7 15 D2. Any advice would be greatly appreciated.

Ok thanks for all your help i messed with some settings its not as loud as before but it sounds good. I turned the bass boost off and turned all the setting on my head unit up.

My amp has an x over setting on it its a knob

Ok i understand ill tape them down just in case what do you think i should set my x over knob too? It goes between 50 and 200

I do have the kx series why?