bmoney9

Do i use 1khz for a highs amp? Just want to make sure.Thanks.

welcome. i live in castro valley..lol right near you. the GF lives in Dublin too.

For mine. I will be running a sundown 1500d. It is definitely enough

Sorry those were external dimensions. I am using .75 thick mdf So inside dimensions would be H: 15 1/2 D: 11 9/16 W: 28 1/2

bump

Enclosure for 12 FI BL Just wanted to see if anyone has any opinions on this box setup. 2.2 Cubic feet H x D x W 17" 13.092" 30" It would be 33 hz tuning. With port area of 30.8" . I am using 14 square inches per cubic foot Does this sound about right with my calculations or am I way off? I have the cut sheets written down but not sure if its needed in this post.

Ok Thanks

It's not necessarily needed in my install. I was just wondering how it was. I have sundown amps and use passive crossovers. So I don't really need it. I'll end up probably reselling it.

Whats the difference between the Kolossus Fleks Kable 1/0 and the normal KLMX Kable 1/0?? Other than the Kolossus made up of pure copper are the strand counts different? Also Isnt the normal KLM Kable just as good as kolossus? Material wise except flexibility? Thanks. Just wanted some clarification.

I just got an ASI equalizer for 25$ from my friend. Is it a good processing unit? Anyone know any info about this company? Its the ASIPE 1 7 band equalizer.Here

thanks everyone for the welcomes

Hey all I am now officially introducing myself to the forums. I came from CA.com. too much crap over there. I like the stuff that goes on here better so yea. Ill be around.

Thanks everyone for help. I will be back in a couple days to update things. Ill check voltage and things. Then add my amplifier.

Thanks everyone for help. I will be back in a couple days to update things. Ill check voltage and things. Then add my amplifier. I think ill like this place over CA.com any day. Too much crap over there sometimes

He already has a new starting battery the Kinetik is upfront. OP, welcome and as stated earlier Big 3 and voltmeter should be your first steps and then go from there. No Ho Alternator wont be needed but more than likely a second battery will be needed but that depends on your listening habits and if you have voltage drops or not. Ok thanks for all the good advice

ok that sounds good. ill have to research how to do it for an accord.

Hey All, I was just wondering what electrical necessities I would need. I have a 99 Honda Accord Sedan. Right now I have stock alt, Kinetik HC1800 up front and 0/1 guage wiring for my sundown 100.4. That is all currently hooked up. I was planning on hooking up my next amplifier which would be the Sundown 1500d with either a 12 or 15 FI BL. I think I am leaning towards a 12 because of space issues in the trunk. Anyways what other electrical upgrades do I need? Would I need a second battery in the rear? Would i need a new high output alternator? Or is this even necessary? Thanks for all the help