Electrodynamic

Once again Supajugg, no thread hijacking. I'll leave this one for a little bit before it goes bye-bye. Well there you have it, you had your 6 hours or so of thread hijacking. No more of your posts will be tolerated if you continue to make them in the aformentioned (previous thread where you hijacked) fashion.

Supajugg, anymore posts like the one you tried above (for those of you wondering, I deleted all text after the one sentance that is currently viewabe) will be promptly deleted. Other manufacturers/retailers are not allowed to sit by and hijack posts made here.

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=13766

We have a price range figured out for pre-ordering, but that's as far as we've traveled at this juncture.. I'll post about pricing at a later day (after we get the prototype with our NEW - custom tooled - motor on it).

You're going to want 4 new motors....but you do have the Claw's. I'd stick with the claws. ...but a claw mated up to the new motor would be the tits.

Actually I stopped because they were taking too much time. They took too long to build and I didn't make hardly anything on them. Kevin selling them for $250 is just crazy. I think I had $425 on the 327's web page when we were offering them.

It's cool Kevin. We'll let it ride here for a while. You might want to post a duplicate in the FS section also for the time being. And he is correct, it's the only 327 set out there. No more will be made so this is literally the ONLY chance to get them.

You have room. Just throw out all notions of carrying anything and you've got it made.

Ryan is changing his basket's color, which will be pimp. Hollis does have 4 Claw's, which will have a color change done on them as well...I think Hoss has the upper hand here.

Lower Fs, higher Vas, and lighter Mms. Everything else will pretty much stay the same with dropping a new assembly into an old motor.

Re-cones will be offered for everyone who wants one. The new moving assembly's are going to do a lot of cool things when mated to the old motors.

Go out and buy that album if you don't have it. It is a must have. 15's will be available when the 12's are available. The reps will know the ETA as soon as we do. After that, they can relay the info as they see fit.

Odd, it works for everyone else. Go figure. The video was taken in full daylight in the back seat of a silver Taurus without an interior...light is very abundant.

Might want to try and replace your monitor. It looks just fine on my monitor and a lot of other people's monitors.

Just because the sub is mounted on side of the cab doesn't mean it will sound muffled. Also, the mounting depth on these puppies isn't shallow so I don't know how you're going to fit it under the seat.

2 cubes sealed, Visonik V900HC with the sub at 1 Ohm configuration, and A Perfect Circle track 11 off of Thriteenth Step. Haha, Hollis loves that tin.

Have at it fellas: http://www.stereointegrity.com/SI12.MOV And yes, that's 3" of throw.

Home Depot. Lowes doesn't carry it (around here). Get the mat, do not get the cloth because it is VERY thin at Home Depot.

David at RE should be able to help you out with the crossover. The XXX mid should do real well on midbass duty. FYI: The Koda 8 is real close to what we were going to come out with.

As Hollis stated, what you see moving-assemby-wise is what will be on our new drivers. We had to go with a dome dust cap for a reason (reps, don't tell please), and it has turned out great. The surround is a new type and I also got a new digital camera so no more pink/green/whatever surrounds!

And another

Ok, here's more.

Well I think enough time has passed and all the reps have read the newsletter so I'm going to divuldge a little bit of info. First, we are making new drivers. They will be silver 12 basketed with new moving assembies and a completely new motor. Pricing is going to go down a smidge instead of just staying the same. Here's a few pics because that's all the info for now. PS: Just one pic for now. This is first proto using our existing motor. Another proto is being made with our new motor very soon.

Apparently the reps have gotten my last newsletter...so why no replies?

I admit that I know nothing on a daily basis.