stevemead08

wow my spelling sucks ass today! you get the point

if you look in the picture of me rolling on the fat mat look up bu the window theres a matal loop it feeds through and wouldnt fit. The middle seat would never be used anyway.

ok so the sound deadener is in upto the front seats, the re audio 8s are in the doors and clear the door panels and the window. the seats are lifted 3.75 inches, the biggest task is fiding room for two sundown and a third before the build is complete. heres what i came up with. the silvy crew cab back seats have a hook on the back of the seat that hooks the back cab wall so access is zero behind there. thats is untill i raised the seats. by raising the seats it allowed me clear the hooks when the seat bottom is up. i didnt want to screw through the back of my cb or flue anything to it either so i took the seats apart and inside there is two steel bars the brace the seat back. i cut 3/4 mdf to fit inside and drilled and tapped the mdf to the steel supports. i streched the fabric over the mdf and had a soild mount for the amps. i had to do both sides. check it out.had to eliminate the middle seatbelt

I took the re audio 8s i bought a few months back and instead of selling them or chunking them i figured they would be good mid-bass speakers so i made some "adjustments" to the door and door panel to make them fit and still look stealth. Some tin snips and 3/4 mdf rings and they fit like a glove.

Installing the fat mat rattle trap in 35degrees sucks

northwest side by 1960 and tc jester i got some friends out in jv, ever go out to the friday night meets on fm 2920 and 45 N? no im new to houston and dont know anybody here into car audio. do the meet every week?

wtf am i doing wrong?? it worked under media but not photo. and it only lets me post a couple with media

ill post more in the morning. it seems hit and miss. wont let me post anymore right now

old setup

no luck. why isnt there just a browse option like facebook? oh well ill tryagain in the morning

im on it. thanks

ok so im a dumbass and cant figure out how to post pics... i click the picture icon and if asks for the picture url. a little help?

Hey guys im pulling out the old system and replacing it and reusing some. currently i have 2 re audio 8s under the back seats and MB quart q series mids and highs. Im puttig the 8s in the back doors and putting a Fi BTL 12 in their place. gonna be running mids and highs off a sundown sax 50.4, midbass (re8s) off my sax 125.2 and the btl off the saz 1500d. anyways its gonna be a process. just got all new knu 1/0 power and ground and 200 sq/ft of fatmat rattle trap today so im getting started on that. already started my btl box12. take a look.

I have had 3 crew cab silverados I will be going 1 12" BL ported, firing up and throwing a sundown 1200d to it My past system was 2 12s in a sealed box firing up but probably only getting .7cu ft per sub. with a RF Power 800a2 running it and it wasnt too bad, but this 1 12" BL ported should be way better How did you raise your seat so high? Got pics? Im curious cause the only thing I know how to do is put about 1" of washers on the bolts lol 12x1.75 mm nut couplers and 12x1.75 all thread. i dont have the seats mounted down yet still working on final box design. that will determine exactly how high the seat is going to rest. www.fastenermart.com if your going that route. the good thing about this set up is its all adjustable

overall dims are 55 long 16 wide and 11 high in the front and 9 in the back. all are outside dims. thanks

New thought. i have 9 inches depth and 16 width. with 3.8 cubes before port. how would a single 15 work in that space? just an idea.

OK so to get enough room under the seats to have bl 12s firing down. i had to raise my seats about 7.5 inches. completely un-reasonable!!! So what i did is cut the 3 inch legs off the box and made the recess for the "tunnel/ hump" in the middle of the floor and made the box to fire up. my question is how far is the sub going to jump when the bass hits. is the x-max the mechanical limit? so if the x-max is 27mm thats approx 1 inch. if i recessed the subs about one inch and put some sort of grill over them would that suffice to protect them? i understand firing them into seat bottoms is pretty inefficient but i plan to have the seats flipped up when bumping but also have them protected if i have someones in the back?

spelled differant. but yeah i get that alot in the audio world.

I have a 2009 crew cab. im trying the same thing right now. i have eights under my seat now. i decided to raise my seats about 4 inches to fit 2 fi bl 12s. what you need is 12x1.75 metric nut coupler and some all-thread. i am building currently a 3.5 cube box and looks like it should fit good.

What kind of truck is it?

I have a 3.5 cube box in my truck. i was wondering your thoughts. what would be louder? i can only mount the 12s down fire but i can mount the 10 into the cab? ant thought? thanks subs ran of a saz1500 for now