Hotdog69

I would like to try Aero ports... is it possible to have rectangle shaped aero ports? Just the way my box is designed it would work out better. after all I am not parallel to the norm right A long time ago back in the late 80's all we ever used was 4" PVC for ports.. box design has come a long way since then. When I designed this box I did it with a piece of paper and a pencil and a calculator. The Ports I went to the 12 v d o t c o m and had it figure the tuning based on the port size I was using. It did turn out good and sounds great. I did a 145.7 on the TL with this setup on T10001bd. Now with the addition of the Sundown amp I am hoping to be closer to the 150 mark.

Some things I am going to try and get done this year are Pull box out and Wrap it in leather / Vinyl to match the interior. I am wanting to build some custom A pillars and redo the doors Definitely need to get some sound deadening done too. remount the amps and clean up the wiring. Upgrade to a High Output Alternator

I have had this system in since last summer, just now getting my build log up. System was done before I started surfing forums.

I have no excuse for it but ... I have been to a couple events and it sounds just as good as the others competing .. I know people dont like to see it but it is what it is If I ever come across another set of the RFR2215 15's then I will rebuild a box for 4 15's

You will have to excuse the wiring here as I just put this on in and I am trying to determine a final place for it. Part of the wire is the battery charger that I keep in my vehicle I will update with cleaner pictures later. Here are some video clips that I have taken of my vehicle. These videos were taken when I was only powering the subs with only the Fosgate T10001bd. Since then I have put the Sundown SAE1200d in and have yet to be metered with the new setup.

HOTDOG's Build Log The Equipment Used Rockford Fosgate T10001bd on two 12" RFR2212 Fosgate Power Series rated at 1000rms 2000peak Sundown SAE1200-D on two 15" RFR2215 Fosgate Power Series rated at 1000rms 2000peak Rockford Fosgate 500x rated at 75rms x 4 @ 4ohm or 150rms x 4 @ 2ohm (on the following equipment) one Set of Rockford Fosgate T1 Tweeters Two sets of Rockford Fosgate T1 6x8 in the doors The Head Unit Alpine CDA-9856 Here is my Stock Alternator Here is my Stock Battery The Big 3 THE BOX The Cover and Box you see here will be wrapped in leather this summer to match the interior The Amps Installed

I heard that there will possibly be a couple event in Danville this year.. I might see you there is they do have one. Galesburg here... the danville events were decent last season... (MECA) Hey Rushrun you are the one I met last year in Canton right

I heard that there will possibly be a couple event in Danville this year.. I might see you there is they do have one.

Peoria, IL

Thanks for the welcome OldSkool_08, nmssd12

Been registered for a while but never posted.. Jumping in to say high to everyone. You might know me as Hotdog on another site. My Current Build 2003 Mercury Mountaineer RF Punch Power DVC 12" Subs RFR2212 RF Punch Power DVC 15" Subs RFR2215 Rockford Fosgate T1 6x8 in front and rear doors Rockford Fosgate T1 Tweeters by sun visors Alpine CDA-9856 Rockford Fosgate T10001bd Amp for 12" Subs Sundown SAE-1200D for 15" Subs Rockford Fosgate 500x Amp For Mids and Tweets