deathcloud

So I only have bought pre fabbed boxes... Yes I know I am a lame person. The boxes are probably not to spec. And the boxes I usually get are cheap and are usually sealed. So I have been doing a lot of research and I think that the next box I want to BUILD is going to be a ported box. I know this scares me because of how hard it is going to be but I think I can handle it... If not it is a learning process. I am getting a Icon 12 dual 2ohm sub. My uncle who lives here does flooring and has tools/experience with wood working and stuff. Also what he does have experience with is fiberglassing and also doing carbon fiber in the hull inside his jet ski to make it stronger. I was watching some videos of building fiber glassed boxes and it doesn't look that hard well the videos do make it seem easy. I know it may take time and experience but I want to attempt this. So help me out guys who have had experience... The box I want to build is 2.25 cu ft. I want it tuned to 29 hz. Can someone give me dimensions of the box and also the port? Here are some specs of the sub to help out for the box specs. Fs 29.9 Qms 5.87 Qes .45 Qts .42 Mms 212 g Sd 480 cm^2 Vas 43.7 l Bl 16.4 Spl 86.0 1W/1m Xmax 20.5mm Wattage: 1000RMS Displacement: 0.16cuft If someone could help me that would be great. I kind of just want a box that has the sub facing up to the trunk. And the slot on the bottom facing up to the trunk as well. I hope this makes sense... Thanks guys. I ordered my 12inch Icon sub I am super happy but want this box to be perfect for the sub. I am used to bass from 1 alpine type-r 12 inch sub. And all my friends think the alpine type-r subs are the best... well I am ready to blow them away with the icon as far as SQ and also with my box build...