synyster

i cant find the manual or any other info on any site

yep it says its 1'' but all the pics ive found on peoples doors n stuff it looks bigger than 1''. im gana make some a pillars with 2 tweets in each side a 2 dayton neos i want to get the same size neos as the tweets some what

anyone have the full diameter of these tweeters????

Sub vvx 12" skar. I want it to be loud. What kind of box should I make and how should I make it if ported is the best way I will be tune to 32 hz. In a single cab silverado

so today i noticed my port feels like 80grit sand paper becouse i forgot to glass it will fiberglassing this thing give me gains??? its gata sound better right?

i will be fusing it still. i just wana know what amp fuse to use

im doing the big 3 and was wandering why people put fuses between the alt and batterie + is it to save the cars eletrical system or is it to prevent the wire from melting???

ty. i doubt my xcons will do 154

<iframe title="YouTube video player" class="youtube-player" type="text/html" width="480" height="390" src="http://www.youtube.com/embed/xdEvXHwbtbk" frameborder="0" allowFullScreen></iframe>

i really doubt this is possible with this setup....but if its real then xcons better be the loudest thing ever made.....http://www.youtube.com/watch?v=xdEvXHwbtbk

so whats the difference in stock and h/o are they just made to handle more heat and bigger loads? i sent dc power a message and they wana sell me an alt that puts out 120amps at idle?????

your box looks like EXOcontralto's box

so if i got a battery or 2 and did the big three theres a chance i dont need a bigger alt??? wouldnt that stress the alt putting 3 batts on it?:/

i have not done the big three yet. but my stock alt is 120amp and my grounds are all to bare metal and tight.

Nope, unless you switch to a 16v setup. So you can do ~15v and under on stock electrical, may need a bypass harness so the car's computer doesn't regulate the alt's power output, but most h/o alt companies will give you everything you need to get it up and running. awsome i hooked up my amp at 4 ohms and it was dimming the lights i was like MF so if i run it at 2ohms i have to get a bigger alt and maybe a battery or 2

if i get a h/o alt do i have to change anything else on the car for it to handle the extra amps???

i want to give my amp the most volts. that is a good thing right?

Im trying to decide witch line driver to get for my system but I've never had one so irk were to start. Im thinking to go with the one rockford fosegate makes. Does any one have any experience. With it or one you think is better?

Well that means I gotta re calculatethe port after the new dispacement

Please someone help!!!!

im building my third box but first wall and i always wonderd if when i calculate the cubic feet of the box do i subtract the port cubic feet??? i have come up with a box thats 17.5cf but the port is 2.4cf and each woofer is .25cf so its like 14.6cf .please some one correct me if im wrong im not to sure

ok im about to hook my system up an im gana put 2 batteries in the trunk there gana be in mdf boxes mounted to the trunk. do i need anything special to do this or can i just put 1/0 wire from front to back with a fuse by the front batt and one infront the back batt.

alright im looking to get 2 18''s im working with a crossfire xp2400, and up to 18cf i want it to be good quality and loud n low 28-30hz...im thinking the best subs would be 2 XCONs. anyone have any suggestions??? or are these the right ones:) ty for the help!!!

hahah that what i was wondering JLs just pop to me on high notes.... all my friends with jl say its there car rattleing. im like your a dumb ass its comin from the cone...

yeah well i cant really do either of those ideas. no one around here has even herd of an amp being more than 1000watts and haveing 2 power and 2 grounds