Stumbo

Cliffnots for those who dont like to hear me blab: 2 12" RLP dual 2 ohm. Pre-built 3.3cuft box. (single cab silverado) To port, or not to port? If ported, will be 2x 4" ports, how long? Polyfill? SQ is the main concern, but spl should follow. Infinite power available. (almost) I suck at math. WinIsd hates me. My cat's breath smells like cat food ------------------------------------------------------------------------- I just put in my order for a pair of 12" rlp dual 2ohms. I have a couple questions regarding my enclosure... They will be installed in my silverado single cab. I already have an enclosure built, its size comes out to about 3.3 cu ft, which is pretty damn big for a truck like mine (ahhhh, the beauty of fiberglass). Now i am stuggling with the old age debate, to port, or not to port. Sound quality is my main concern, however, my reasoning for upgrading from my last subs, is because they just didnt have the output that I wanted (dayton HO RF 12's). As for power, I am almost embarrassed to say, I have a pair of hifonics 1500's available that I am probably going to run, so I am looking at about 1200 watts per sub. I know this is overkill, but i have pretty good self control over the gain knob. Ive plugged in the drivers specs into winisd several times, but i keep ending up with some jacked up numbers that just dont make any since. And when I add polyfill to the equation, things just get more confusing.... Also, due to the shape of the enclosure (wedge) I dont have the means to build a squar port, round is a must Thanks guys, any input would be greatly appriciated. I know im asking a lot. Ive been scrathing my head over this for some time now, and im expecting the drivers to be delivered pretty soon, I want to be prepaired when they get here. Thanks again, cant wait to hear som input!