BanginGMC

Kicker ZX1500 KICKER 08ZX1500.1 Class D Mono Amplifier ZX1500.1 Amp - eBay (item 360251403497 end time May-09-10 17:47:55 PDT)

Man you didn't even put what fuckin size they are. Put some effort into a post. :banhim:

Fed-Ex came by around 12 but i wasn't home, so they left a "Door Note" and they will be back tomorrow with my speakers! THEN FINALLY i can start installing!!! If anyone has some ideas for an Amp-Rack feel free to PM me

Knukoncept Kolossus Fleks 4 Gauge 4 Channel Amp Kit 18 Feet 4 Gauge Blue Kolossus Fleks Power Wire 3 Feet 4 Gauge Black Kolossus Fleks Ground Wire One Waterproof Mini-ANL Fuse Holder with 120A Fuse TWO 5 Meter Klarity Kable Blue OFC RCA Cable with Built in Turn On lead 20 Feet BLUE Klear Kable OFC 12 Gauge Speaker Wire 2 Gold Plated 4 Gauge Ring Terminals, 2 Gold Plated 4 Gauge Spade Terminals 6 feet Split Loom and wire ties Packed! 18Ft Power Wire, 3Ft Ground Wire, TWO 5 Meter RCA's, 20Ft 12 Gauge Speaker Wire, 2 Ring Terminals, 2 Spade Terminals, Mini-ANL Fuse Holder, 120A Fuse 5 Meter Klarity Kable Blue OFC RCA Cable with Built in Turn On lead 18 Feet 4 Gauge Blue Kolossus Fleks Power Wire (2058 Tinned Strands of Pure Oxygen Free Copper!!) 20 Feet BLUE Klear Kable OFC 12 Gauge Speaker Wire One Waterproof Mini-ANL Fuse Holder 2 Gold Plated 4 Gauge Ring Terminals, 2 Gold Plated 4 Gauge Spade Terminals, 1 120A fuse

Good work sir

nope.....

Avatar picture FTW! I love it

And DUAL!!!!!!!!!!!!!!!!!!!!!

Alpine for function, Eclipse for sound

Yeah man, he got back prompt which is always a good sign. (been dealing with iraggi alt lately and dom took a month to get back to me when ive been waiting weeks for my alt) so always a nice change of pace lol I just have to go to my house and take measurements. Pain in the ass not having my car here. Threw a Fi X in my girlfriends honda cause going from a 18" in a T line to some pioneer 6x9's is just not the best way to cope with no bump lol. Im going to go with a wall for sure though. My buddy drew this up on google sketch. What the general concept will be. Then with a nice amp rack on the back with the batteries on the floor. I'm still torn between going back to the AQ2200D to each sub, and trying something bigger. I'm talking to atomic trying to get some sort of deal on the AT-7000.1 because its going to be discontinued. But if i get the Atomic, im going to have to spend another grand on batts lol. Plus i'm not even sure if the 300a alt would be able to do that. Because i havent really done anything to my exterior besides demolding and my billet grille/air dam. So i mean i could get a pair of shoes for her and maybe some new paint (speaking of paint, bangingmc two thumbs up for your paint job) lol. Yeah, i've heard that about about iraggi.. But it's good that Dustin replied fast, he usually does I know what you mean about going from 140+ db's to 0.. shit sucks, music just isn't the same. On the amp issue, if you can get a sub amp that can power both subs then do it! It bypasses the mess of gain matching. and discounts are always nice Shoes for the ride is ALWAYS a good thing! and custom paint is always a nice thing to have as well What color is the truck now? -- didn't see any pictures. If it's white from the factory, i think pearl white always make the truck so bomb Thanks for the compliment!!

Depends on the connector. Heat the connector, then take the sodering stick (whatever its called) and press it against the connector and exposed strands of wire that you see after you crimped the connector and the sodering stick should melt right in place. YouTube.com has NICE as How To videos on this.

Okay, thanks. They confused me when they said that ohm load is recommended for an amp stable at 1/2 ohm mono. Option 1 (series/parallel) = 0.67 ohm load Voice coils wired in series, speakers wired in parallel Recommended Amplifier: Stable at 1/2 ohm mono

My dog would go nuts on our trampoline when we put the sprinkler underneath it, it was bomb.

Model Solo-Baric L7 15 Size (IN.,CM) 15, 38.1 Impedance (OHMS) 2 or 4 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 2000/1000 Sensitivity (dB 1w/1m) 89.4 Sound Quality 00.1% Frequency Response (Hz) 18-100 Mounting Depth (IN.,CM) 8-11/16, 22.1 Mounting Cutout, Square (IN.,CM) 13-3/4, 34.9 Min Rec Sealed Box Volume (CU. FT., Liters) 1.5, 42.5 Max Rec Sealed Box Volume (CU. FT., Liters) 6.0, 169.9 Min Rec Vented Box Volume (CU. Ft., Liters)** 3.0, 85.0 Max Rec Vented Box Volume (CU. Ft., Liters)** 6.0, 169.9

Well, if its 0.5 ohm stable it SHOULD be able to handle the stress..

Will work for an amp stable at 1/2 ohm mono correct?

first that comes to mind is Orion 2500 -- 1700 watts x 1 chan. @ 2 Ohms i know its old school

Will have to do thanks. So the big 3 and another battery would work fine then? Wont be able to answer that question until we know how many amps your alternator puts out i thought he said 105amps? but also know his listening habits would be good to know for example if he only pounds it on the freeway lol no h/o just what you got and the big 3 and call it day! but if he slams it all the time and at stop signs and lights! Oh, did he? lol i've been bouncing back and fourth from thread to thread haha I have 2 subs and 2 amps. So 1 amp is pushing 1 sub each sub is dual 4ohm so each sub is wired to 2ohm so each amp is doing 1000 watts rms so 2000 in total. To make everything clear lol. 105amps might be pushing it on 2krwm.

Will have to do thanks. So the big 3 and another battery would work fine then? Wont be able to answer that question until we know how many amps your alternator puts out

Check my signature, the company does great work and respects the wallet! He'll e-mail you prices and pictures of past work, he does neon lights, plexi glass, the works. Just ask you to notify them that i referred you Good Luck.

Wait.. a local shop that claimed they can "beef up a stock alternator" and it worked?? -- first i heard of this.

I actually emailed DC first and they said they currently have no alternators for my car. Try Mechman next!!!!!!! 3rd link down!

It's all good brother!

Home DC Power Engineering - Welcome MechMan - High Output Alternators and More DB Electrical Starter-Alternator I recommend DC Power over anything.

That link is to an ALPINE Mrp-m1000