Argent Audio

Ok I have a design done for you. I went with 1.75 per sub as Jacob recommends. Aero ports are going to work great for your application. 38 wide 20 tall 25 deep 7 cubes @ 33 Hz (2) 6 inch aero ports. If this looks good let me know and I will get you a price. Andrew

Could you let me know what type of car this is going to be going in I could recommend what way to face the sub etc. Andrew

Here is what I came up with for aero ports: 17.25 deep 10.75 tall 20.75 wide Flush mount. (1) 3 inch aero port facing the rear of the car, sub facing up. 1.2 cubes @ 33Hz. $140 for the enclosure. If this looks good then I will figure out what size plexi window we can fit. Andrew

I will get you a quote tomorrow, been extremely busy at the moment. Andrew

While working on the design I had the thought to use aero ports for this box. Would you be opposed to that? It would help keep the box size down by a lot! Andrew

The cost of the enclosure is going to be: $190 enclosure $25 ports $xx shipping for ports to me Andrew

Ok sounds good. Let me get a price together for you. I just sent the shipping quote into PSP-Inc for the ports. Andrew

Ok, do you have a measurement to the top of the seat? I like to design around that as to not obstruct your sight out of your rear view mirror for safety. Andrew

Your looking at: $210 for a normal slot ported one and $285 for one with a flared port Andrew

That 28 includes the head rest of just the top of the seat itself? Andrew

Sorry for the extremely delayed response. I was able to shave 1 inch off the width dropping it to 36. There is also .75 inch indent which will give the port more room to breathe. With those dimensions and if I mount the ports in the middle of the side of the box, will you have enough room for them to breathe? Andrew

With the dimensions you gave there is not enough room to make a proper size ported enclosure. I was using the min air space Fi recommends which is 3 cubes. Andrew

If you want I can get the port and install it for you too unless you have it already. I get wholesale prices on them. Andrew

If you could give me the dimension to the top of your rear seats I will try to keep in under that level. And I'm assuming the 38 is width. Andrew

No I have not. Not many local customers for me are interested in a box like that so I have not had the chance to. Andrew

The box is going to be pretty wide, almost 30 inches if we do not change some other dimensions. Right now I have the depth at 14 and the height at 13.25. Let me know what you want to do. Andrew

Sure did, yours is on its way to you. You should receive it Monday or Tuesday at the very latest. Andrew

Can I have an update on my enclosure. Im the person with the icons and the flared port my email is [email protected] Almost done. Time has been short with the holidays around. I'm going to put another coat of paint on the port tomorrow. The cold temps have been slowing me down a lot. Andrew

If you could give me your max dimensions I will get a design started. Andrew

The ports will be physically too long to have them fire out the front of the box. Let me try a few things with the design. Andrew

Your looking at $140 plus the cost of the plexi window which varies depending on size. Andrew

Use aero ports will be easiest for this box. A typical slot port will go outside of your max dimensions. 37 wide 18 deep 15 tall The ports will be firing out the side. Do you have enough room to one side of the box for proper venting? Andrew

I will get a quote going tomorrow and post some results. Andrew

Id like to stay within the dimensions I gave u, but if you need more space we can adjust the depth. I can go 18" possibly 19 depth. If it helps I don't mind aero ports either. Yo any word on the quote? This xmas bonus is burning a hole in my pocket lol Just got home from out of town so I will post a design tonight. Andrew

Before I send you a request for money I want to get a solid design for you. So if you can give me your max dimensions that would be great. Andrew