Adrian_D

RD is great quality ? Based on the business practices of RD, rd and ssa shouldn't be in the same phrase. "oh, we're going to call back all the amps and you have to take a hit because of our fuck-up"

You can bet that people are going to break these. Excesive vibration, wiring too low or low voltage aren't things that should be covetred by warranty. Curious to see the guts on the AB1100.1 and the SPL dyn version...I sure hope it isn't another discussion like the bxi2608 vs aq2200 and there is real proof that they are different.

DSP stands for digital signal processing, ie active crossovers, eq and time alignment.

Thank you for the comments guys. Yes, I need to find a way to build a good mold. Masking tape on the mdf mold is a pain, the piece needs sanding and bondo to get it perfectly smooth. Get some scraps of UHMW. You don't need any release agent or cleanup. I'd need a 10 inch dia / 4 inch tall block to build a good mold, harder to find such a piece Can uhmw sheets be glued together ? Thank you for the comments guys. Yes, I need to find a way to build a good mold. Masking tape on the mdf mold is a pain, the piece needs sanding and bondo to get it perfectly smooth. Crap, I forgot to give you props yesterday. Sweet for sure. What diameter pipe? 6 inch pipe. 1 complete aeroport is $35 local this is cheaper so far. Thanks

Thank you for the comments guys. Yes, I need to find a way to build a good mold. Masking tape on the mdf mold is a pain, the piece needs sanding and bondo to get it perfectly smooth.

*saved*

The amp is broken, it outputs DC. You are lucky you didn't fry your subwoofers. DON'T connect the subs again before you fix it. I'm not familiar with the Arc's but most of the amps should have dc protection. Protection or not, take it to a repair shop.

And this has to be the greatest emoticon of all time : I vote it for the emoticon list

Moar diy flares Take 3 mdf disks, take them to a good machine shop with dimensions Add some fiberglass on the mold Silly kitteh likes the flare Needs a bit of prep work for paint

the guy in that panel, apparently

for one you have to use sd to either dampen or undampen a line. if the line is way to dampened in tradional sence it is considered way to learn with tight bass. port act completly different then a line and can be tuned in a way that is simulair to that of a ported in other words tweeked till you get spl or hard pucnchy bass kinda like a ported you go so big on the box and tune it to 28 to 33 hertz the note flatens out and becomnes boomy. ior smaller with a higher tune you get spl. now with a line you can make it peak changeing the sd larger or flaten it out by smaller number for sd this is all part of tuning a line. if he knows any thing he would no this and all he give is bs. btw i thought there was a rule about people postiong if they did not know what there talking then stfu. Apart from the explanation that hardly made sense, you should quit the attitude. I'm willing to bet that 95Honda has quite a bit more experience building transmission lines. It's very frustrating to see all the hype surrounding this design.

Clarify a little what you called bs in your previous post...

WTF, all negative comments from the instructor I want the Elise in front of the mazda though

i bet aaron pretty rough up there i hear right now. and looks like more of the fluffy white stuff coming on Wednesday 28" out there isn't it? We will only get about 8" here in the cities I bet. Up to 33" apparently in some areas. Dayum. We barely got a bit of white stuff

Judging by the color of the oil really doesn't fly with diesels. Put new oil in, run it for 2 mins and it's black

Well she is british

Excellent then, should help a bit with the under-hood temperatures. I hope more than some hood vents, which would have cost me $50+ shipping. Thanks for the link

Where did you get the wrap ? Just generic heat wrap ? I have some really measly heat shield on the manifold and downpipe in the jeep and thought about that to cool things a bit.

Oh yeah, another exam down. One more to go then 2 weeks of box builds and installs. money !

Lucy Pinder, nice !

Props for the oem integration ! Sweet job

Great way to advertise

There are plenty of stupid people out there.

It's quite simple, some have 4k because it's more than the guy running 3k