ssh

Different enclosure volumes and types yield different results. The driver will function well between that amount of airspace. Too little and it isn't as efficient, too much, there isn't enough cone control, or it simply isn't practical. A lot of what I'm saying is generalizations.

The top panel where the speakers are mounted to, is: 36" x ~14"-14.2" Correct?

Have you checked to make sure the motor will clear the rear panel when mounted?

The sealed enclosure will have a flatter frequency response, and not as much of a peak like a ported box (with 30hz tuning, etc). Sealed enclosure requires less airspace, which works well for your case.

Sounds like you got it down. what exactly do you need help with, or want answered?

damn , I'd work my butt off getting that extra 2 tenths ! sooooo close ... Duct tape around the gaskets, done.

I want to know how she managed to live long enough to make that video.

Basically yes but you forgot the sanding Wrapping is kind of cool if you have a heat gun. Oh I don't sand. I don't have a sprayer for the adhesive or heat gun. :/ I do have contact cement that works pretty well, but wrapping is always a Bitch for me. I should practice it more when I have some time. For the primer and clear coat do you have any brand or type suggestions? This is all new to me. I also got cabosil for smoothing out the last layer, but it'll be harder to sand. I don't have a sprayer either I just use some cheap contact cement, the same I use to carpet boxes. Works fine I have dap weld, it works pretty well for what it is.

190ml each: Fun stuff.

Got a little overcast, should be nice for working outside today.

Snowing right now. My neck is getting baked right now, sitting in a lawn chair, break time from art. If only I had a scarf.

Primer and clear coat TOP

Basically yes but you forgot the sanding Wrapping is kind of cool if you have a heat gun. Oh I don't sand. I don't have a sprayer for the adhesive or heat gun. :/ I do have contact cement that works pretty well, but wrapping is always a Bitch for me. I should practice it more when I have some time. For the primer and clear coat do you have any brand or type suggestions? This is all new to me. I also got cabosil for smoothing out the last layer, but it'll be harder to sand.

I love it.

Painting fiberglass: Several coats of primer, several coats of paint, and finish clear coat? *despises wrapping*

The volume of the cabin and enclosure alignment will play huge roles. I see you mention a high output alt, but don't have one? Is the 4500 at it's potential, or gained down until electrical is upgraded? If your going to wall your car, you mine as well go with larger drivers (15, 18).

My exact thoughts.

Comfort Eagle was their best album IMO. Huh? I just want a girl a short skirt, and a looooooooooooong dress. A few of their other albums are still pretty good.

I want a girl with a short skirt, and a looooooooooooooong jacket. I want a girl who gets up early, and stays up late.

Just paid $37 for a rattle can, oem volvo. Guess it could be worse.

Google Sketchup, isn't made specifically for enclosures, but works quite well.

I actually slept quite well last night, tonight should be even better.

http://www.youtube.com/watch?v=CseO1XRYs9I

I really need to hit the books... It's in the loudspeaker cookbook, although I'm sure it's in a thousand other books too. It is. Reading it through the third time, actually. My "bedtime" reading isnt absorbing lol Try in the morning with a cup of coffee. I wake up at 4:20am. I am screwed. Glad there is a Stefan around to solve my port volume issues! You wake up at 4:20 just to get high? I made a calc pertaining to some of the stuff: http://portsgalore.stefanhinote.com/ Might find that useful.