ssh

Box is sick! Bolted down, even better. Even adds a little industrial look

Nice! I like the slant, fits perfectly behind seat

I never said anything about it being bad. I could be full of shit, but I don't see any difference in terms of dangerous vibration to the amps if the amps are mounted inside the box or outside. After all a speaker creates two waves, one goes into the box and is trapped (sealed) so there's no cancellation and the other goes into the cabin pressurizing the air. Or the backwave goes into an enclosure and out through a port... Either way, to me I would think the pressure in the cabin vs pressure in the box would be close, so it wouldn't make a whole lot of a difference to your equipment.

Looks like it, wonder if he climbs through one of the holes when the subwoofers aren't in, or if he can open up the back?

Build a wood box around it, use L brackets to screw the box down into the metal floor. Just make sure your not screwing into the gas tank.

Mess of a garage lol.

Ya I agree. Im contemplating filling the otherside and just redoing this one later. I think I will...

I should have made the fiberglass go all the way to the corner, instead of stopping short a few inches, original plan was to shave it down and try and make it flush... yeah wasn't happening Still need to mount the baffle / pod to door panel. I don't think it came out GREAT, but good enough for now. Time to mount it and move on to next side. I'll post more pictures in a couple days once I get my cross overs in and put the doors back on.

Haha thanks, after Tirefryr told me it doesn't do anything, I bought a respirator Me too! Just bought some pleather and foam.

Hmm, maybe its more of a baffle stretched to an end vs a actual pod. Once I wrap it in pleather I could probably screw it down from the back. Or that's the plan

Not hundred percent sure, I know I can do screws from behind the door panels into the speaker baffle area. As for the left side where it's fb and no wood, perhaps lay down some two part epoxy? Any tips? I'm going to see how well this one fits on the panel, if it's close I'll finish it up, if not I may just make a new baffle and start over again

Sorry, i have no idea what you mean lol. Any score difference on the TL, from old kenwood to the audiopipe? Does the dildo come off the top? Jw Not tested yet. I will be taking this setup, hopefully plus a corrected box to the April 9th show. So we will see. I don't know anyone other then Justin that has a shop, and then going further, i don't think he has a TL just yet... Good one bro. Probably but i won't be taking it off. It doesn't look that bad to me April 9th show? hmm, maybe I'll make it.

Pulled off door panel, did another layer of resin and mat. Tomorrow lots of sanding and bondo!

Sorry, i have no idea what you mean lol. Any score difference on the TL, from old kenwood to the audiopipe? Does the dildo come off the top? Jw

Why not call them or even try an email? It varies which way is the best / fastest way to get a hold of them. Sometimes it's calling, another day by emailing, and another by forum. At least in my experience.

Is this good enough for fiberglassing, http://www.lowes.com/pd_64485-98-R8511-2_0__?productId=1191497&Ntt=respirator&pl=1&currentURL=%2Fpl__0__s%3FNtt%3Drespirator Or, http://www.lowes.com/pd_69598-98-R6211_0__?productId=1097909&Ntt=respirator&pl=1&currentURL=%2Fpl__0__s%3FNtt%3Drespirator

Me too! I'm hoping after I get a couple more layers, sand it, bondo, and wrapped in vinyl / pleather that it looks somewhat decent Well then I'll take it off so I don't look like a fool, and go buy a respirator, thanks

I honestly don't know what I'm doing, just jumping in Going to add a couple more layers tonight, let it dry, tomorrow try and do some bondo / sanding

hmmm? I had some tang band 6 1/2s just laying in my room, figured I could try and make'm fit in my doors, if they suck I'll replace them with something else when I can afford it

When I bought my dc alt, it took a few weeks before I got it, if I remember correctly. Wasn't a big deal, great product, didn't mind the wait. Hard to get a hold of at times, but still a great product and I felt it was worth it in the end. I'm currently waiting until DC can make a case to fit my vehicle, probably take a few months since they have so many orders and other cases that need to be designed. I still believe their product is worth it, or I wouldn't wait six months... Do I sound redundant?

Are you outta phx?

hmm, maybe you need to reread it and not bash people Just a coincidence he used the word arsenal and that AA makes a driver called arsenal.

Damn, good deal. There going out of business, probably why. At least the ultimate E in my town is... Yeah pretty preference based... I put some coaxial 6x9 focals in my fathers truck with new hu and amp, big improvement over factory, I think it's a good assumption if I liked those then I'll enjoy these. With Focal I wouldn't call that a good assumption. They don't sound alike from cheaper to more expensive lines, more so than other brands. I've never heard a Focal mid I liked. They have some wonderful tweets, but I've not been one for their mids. Funny you should say that, I'd pick on their tweeters and not the mids although I am not really a fan of either. Actually probably their crossovers and balancing really, the tweeters might lay down when dealt with right. Yeah the tweeter I heard wasn't that great in my opinion, but the mids were decent considering it was 6x9 (or 6x8 idr/know if they even make that...). I'll look around, may check out some hertz too.

Damn, good deal. There going out of business, probably why. At least the ultimate E in my town is... Yeah pretty preference based... I put some coaxial 6x9 focals in my fathers truck with new hu and amp, big improvement over factory, I think it's a good assumption if I liked those then I'll enjoy these.

hmmm, thinking about some focal 165 a1s for my doors in a few months. Anyone have any experience with'm http://www.sonicelectronix.com/item_7755_Focal-165-A1.html