ssh

Naw that's a fucking weiner dog!

That's sweet. Time to frame it.

Capacitors are not beneficial in any way. Gain half way on the amp is arbitrary. You're going to want a subsonic filter, or I'd be willing to bet that you'll come back in a few weeks posting about a blown sub and how it's a piece of shit. I wouldn't expect the SA-12 to sound very good in that enclosure. It has a relatively high tuning and small volume (peaky), no double baffle, and I'll speculate that the port area may not entirely be sufficient.

And I'm the absolute worst at that.

You're beginning to sound like me--sometimes it's better to take a step back and realize it just doesn't matter.

Is that the same engine in the F150s that had an issue with blowing out the sparkplugs? I don't remember if it was a 4.6 or 5.4

It has 6500 rms! It's going to be so beast!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Where can I preorder?!?!

The hubs are worth more than that. I have had terrible luck with Mavic, but they are French so that is expected. And really, if they don't do what you need lacing your own on those hubs more than saved you what you paid. The cassette is worth $25, geared better for road use too compared to mine and it has very little use. Honestly, I think they are better than the Ridiga's which I have now: typical simple front and double Zac19 rear, both with Shimano RM40 hubs. And these have not needed truing since I trued them. Do you have a dislike for a lot of french things too? He despises their cooking-ware.

A few gallons??? Big fridge, or freeze part of it?

Place and beach looks super nice, I'm jelly.

Hopefully it'll open another door down the road after you make some bank off it.

Congrats Matt!

http://www.youtube.com/watch?v=FpWkZiZaQsA

http://videos.digg.com/post/48628072516/michael-shannon-reads-the-insane-delta-gamma

Now that you mention it, the only thing I'd need extra is a boost gauge, so once I put all the details on paper and get the go-ahead we will do the deal Now that you mention it, the only thing I'd need extra is a boost gauge, so once I put all the details on paper and get the go-ahead we will do the deal forks, boost gauge, speakers, and cocaine?

That's how they get so damn light. Thickness of a few sheets of paper--I think.

Interesting, but the ending was rather anti-climatic. I wonder if the kid would have still been scot-free if they hadn't found "Theo." Just go rob a bank, and if you're caught say someone from the govt put you up to it--rofl.

What shouldn't? Asking where and how people download music illegally.

http://www.businessweek.com/articles/2013-04-18/in-virginias-fairfax-county-robbing-banks-for-the-cia Worth reading.

This really shouldn't be discussed here.

Take a picture of the trunk area. Enough space to fiberglass an enclosure for a 10"?

Sean is sixth one back.

If he knows any specific sites I could use for making plans, and any recommendations on programs, materials. Really just anything he has to offer. I've seen some using aluminum for the base, and others using wood. Perhaps wood would be good to start off with as I could adjust the spacing by drilling new holes, and after testing I could make a final version out of a small aluminum block.

Anyone ever make a yagi antenna? I'm looking into building one for 2.4ghz (wifi). Found a few sites with calculators for determining elements' lengths and spacing, but don't know enough to tell which (if any) are good. Also need to make a balun.