Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Disturbed

New Members
  • Joined

  • Last visited

Everything posted by Disturbed

  1. If the amp is on a certain level you can still hear the bass bound if you knock on any panel where the midrange speakers are. The higher the level on amp goes the louder and more continious the pounding goes on. So it must be rca's?
  2. The first install we did, we used a two pin fuse which melted like ice on a warm day. I replaced the power cord with a thicker one. It is mounted directly under seats to the body. They used a 10g wire which i think is a bit to small. So if the rca's is touchin, then to what? After that we used a fuse block. But no luck. Is there a way to fix this, or should I take everything apart and try again to pin point the problem?
  3. Hi, iv'e seen something very strange for the first time. Iv'e installed by sound from old car to new. A 2000w sub on a 2500w amp. 1 x hi to low convertor and speakers still run of factory radio. Amp mounted on rear seat. When the volume is all the way up and the trunk is open every thing seems fine. But when the trunk is closed and the volume turned softer until 0, the sub keeps on pounding, very loudly. But if the 1500w amp is tested, everything is normal. Could this be because of the hi to low convertor or because the speakers are still running on factory radio?

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.