Everything posted by sefugi
- 95 Eclipse Father/Son Project
-
95 Eclipse Father/Son Project
Turned out pretty good being we are at painting. May not can tell in pics but the panels turned out better than the car, might sand and re-shoot it.
-
95 Eclipse Father/Son Project
Honestly? It's an Eclipse, for a teenage guy. It fits perfectly.
-
95 Eclipse Father/Son Project
- 95 Eclipse Father/Son Project
Lots of smack coming from someone with nothing to show!- 95 Eclipse Father/Son Project
We finally had a day that the weather cooperated and I wasn't workin'. Soooooo we got some painting done. Long awaited. Amp plate, support and battery rack painted. By sefugi at 2010-07-10 By sefugi at 2010-07-10 By sefugi at 2010-07-10 Got a couple coats of blue on the car. By sefugi at 2010-07-10 By sefugi at 2010-07-10 By sefugi at 2010-07-10 By sefugi at 2010-07-10 Rear bumper and the side skirts. By sefugi at 2010-07-10 By sefugi at 2010-07-10 By sefugi at 2010-07-10 Just finished the front bumper and front fenders. Little problem By sefugi at 2010-07-10 By sefugi at 2010-07-10 Houston we have a problem! Got a run/sag in this one. One thing about paint, you can always sand it and repaint. By sefugi at 2010-07-10- 95 Eclipse Father/Son Project
Yes Yes Yes! That is what we have done most of the day. Uploading pics now...- 95 Eclipse Father/Son Project
if you don't have anything good to say then Let them all bring on the opinions......Everybodies got one.- 95 Eclipse Father/Son Project
You forgot ricey fuel.- 95 Eclipse Father/Son Project
Thanks! Soon as we get all the painting done we will be getting the hatch alll together. Got ideas on the subs and the settings on them. Will try out once they are in.- Got some new goodies today
Time to build somethin'!!- Stopping in to say Hello.
Welcome to SSA Forum! Look forward to seeing your build...- 93 Fleetwood Caddy build.
Sorry I'm comin' into this late, glad I picked up on it when your gettin' your second wind. Rear deck looks really good! Nice welds and I like the constrast between the center sub sections texture and the suede on the deck. Clean work! Lookin' forward to seeing you complete such a well started project.- 4 DP21 Wall Build
Glad to see progress, It sucks when you have to keep waitin' for the weather to get something done.- 95 Eclipse Father/Son Project
Thanks! Had great weather yesterday, but I'm working all week. Hope it holds out for the weekend!- A little custom sticker work.
The 3D effect is really cool.- need serious help
Checking the manual and rechecking wiring never hurts we all make mistakes. Glad your in the bass bussiness. Enjoy!- need serious help
May want to get someone to jump in here to verify, but if you paralleled each sub to each channel I think your giving the amp SAZ1500? a .25ohm load. Those amps I beleive have two channels but they are bridged inside. If that the case you need to try series each sub to each channel 2ohms each then internal bridge gives 1ohm. If it is running .25ohm I'm sure it is going to protect. Check the manual: http://www.sundownaudio.com/SAX-1200D,SAZ-1500D,2500D,3500D_manual_0512.pdf- need serious help
I beleive if you wire them in series you will have 2ohm each.- need serious help
I don't know if this will help but you can check your sub wiring by comparing to the wiring setup on this link: Subwoofer Wiring Diagrams Double check the sub wiring and I would finish up your Big 3 and recheck. Good Luck!- 95 Eclipse Father/Son Project
Feel pretty good about the body, not sure about how the aftermarket body kit is goin to turn out. Most fiberglass stuff is so wavy No big wing, but lots O lights!- Welcome to the IHoP
I'm 45, I don't know if I'm there but I sure have had the itch to get into something for Me Me Me!- Why is car audio so appealing.
Hey, That's gonna be me!!- 95 Eclipse Father/Son Project
Well I figured I needed to give some kind of update. The weather here has not been very cooperative. We did take a weekend off to go to Scrapin' the Coast which was fun but put us behind since it pretty much has rained on and off for the last two weeks. The paint work is really holding us up since nothing can really be solidly done until the paint is completed. This is how the car is sitting waitin' for some skin.... By sefugi at 2010-07-07 We did do a little project in our waitin'. We got a new center section for the rear of the car. Of course we had to make a mod to it. Since we are going with a aftermarket type spoiler which has no 3rd brake light we ran our wires to the center section and installed led's in the center section to give a 3rd brake light which will give brake lights across the complete rear of the car. We think it will be ok and set it apart from other vehicles on the road. Here are the pics of the process. By sefugi at 2010-07-07 By sefugi at 2010-07-07 By sefugi at 2010-07-07 By sefugi at 2010-07-07 By sefugi at 2010-07-07 By sefugi at 2010-07-07 That's all we have for now, if the weather gets better for the weekend might actually get something a little stronger to update with. Thanks for all the support!!- MUST WATCH! Hilarious Demo's!
"I ain't heard nothin' yet.........Oh! can u turn that down?" Funny stuff! - 95 Eclipse Father/Son Project