Dave Smith

Thank-You FI !! I have only had this sub installed for a week and every day it gets louder and sounds better! I don't want to get out of the truck when I get to work in the morning!

Thanks a lot guys for the quick reply's!!

I just installed my BL12 and it is powered by a RF T1500-1bd. Could I get some input on the proper amount of power or suggestions on break-in period? Thanks

Thanks Guys! Three votes ford DC in ten minutes, that's good enough for me! Just got off the phone with Dave from DC, just ordered the 170/250XP and a gates HD belt. Be here next week! Thanks for your quick reply's!

Looking to get a H.O Alternator. I have read some bad feedback about DB and Iraggi. What brand would you suggest? I have read good things about Excessive Amperage! Any others? Thanks

Has anybody ever used PSI or Fix My Speaker?

Perfect! I think you two just answered my question!

Could somebody please tell me the differences and or pro cons about these two subs? This is what I have narrowed done to to buy. FI is really busy now so I thought I could get some opinions before I order! Thanks

Well since my last time here I have my seat lift installed and a enclosure built! My enclosure ended up being 2.25cuft with a RF T1 for displacement measures. I would like to use another sub though, the box is tuned to 32hz and I also purchased a RF T1500-1bd for more power. I was thinking along the lines of a FI BL 12, I like the SPL but I would rather focus towards the SQ side. The box is limited to 7" of mounting depth. Do you need any more info? Thanks

Thanks for the info! I ordered a seat lift today that will give me 2.5 inches more to work with! I hope that will let me get into the 6+ inches of mounting depth! I will take some measurements and see what I end up with! It is suppose to be here Wednesday!

Can you have a sealed box of 1.2 cuft and put two subs in that are .6 sealed subs and put on a box that matches up on air space, but the box is not divided?

My box right know is 32.25 wide 6.25 tall and 14.25 deep there is a 4 by 17 cut out that goes over the hump in the middle of the back seat. The back seat is a 60/40 split and the box fits under the 60% spot. I think the only way I am going to get any were is a seat lift. LMI makes a seat lift that is 2.5 inches, I didn't want to go this route originally but I have spent to much money to start going conservative! I have looked at some other enclosures today including fiberglass and the only good way to get 6+ inches is lift the seat. Am I thinking right? All the enclosures I have looked at are under 6 inches with no room for excursion!

The Rockford P3 dose have fs of 45,I also have and haven't installed a RE SL10 that has a fs of 36. I am hurting for space,that's why I have been reading and learning about sealed enclosures ! I thought I went into this pretty informed but I was only about half right at most! Maybe seat lift or fiberglass enclosure? 6" is about all I have under the seat!

2004 Ford F-150 Crew Cab tuned at around 45hz? I had a local shop do the work. I like everything I struggling with the sub sound.