tismo

Can somebody verify my voltage findings to adjust my gains with DMM? front stage voltage= 14.83 v Subs voltage= 20 v

That actually explains a lot. the manual says I am just waiting for weather to clear up so I can set my gains with DMM and I should be good to go.

There are 2 crossover switches, which one you are referring to? the one in the 2nd pic or 3rd? Also, Should I set the switches to flat if I have front speakers with crossovers? Thank you.

Thank you for the welcome. What I would like is put in the optimum settings on both the memphis and JVC HU so I can get a clean sound quality . For example I dont know if the amp gain on the headunit should off, low or high. this is how I have the amp setup right now but there are a couple of knobs I dont know if I should adjust them or not, the sub level and

Hi everyone, I need some help tweaking my humble system lol. I have a JVC KW AVX820 http://i139.photobucket.com/albums/q311/macuser74/The%20Bitch/DSC09965.jpg?t=1271260441 kicker 08ks6502 Component system with two woofers, two tweeters, and two crossover networks Symmetrical 12dB/octave high-pass-12dB/octave low-pass crossover/protection network with 3-position tweeter attenuation 75 Watts RMS (150 Watts peak) power handling with 4-ohm impedance 35 Hz-21kHz frequency response 2 Kicker 07cvr124: 12-inch CompVR Subwoofer with 4-ohm impedance Injection-molded cone with 360-degree back bracing and aluminized coating; ribbed Santoprene surround 400 Watts RMS (800 Watts peak) power handling 25-500 Hz frequency response a Memphis 16 MC600D: Number of Channels 5 RMS Power (4 ohms) 55 watts x 4 chan. + 100 watts x 1 chan. RMS Power (2 ohms) 75 watts x 4 chan. + 200 watts x 1 chan. RMS Power (1 ohm) Not Stable + 400 watts x 1 chan. Bridged RMS Power 150 watts x 2 chan. (Chan. 1-4), Not Bridgeable (Chan. 5) Peak Power Output 1400 watts Min. Impedance Unbridged 2 ohms (Chan. 1 - 4), 1 ohm (Chan. 5) Min. Impedance Bridged 4 Ohms (Chan 1 - 4), Not Bridgeable (Chan. 5) THD @ Rated RMS Power 0.03% Speaker Level Inputs No Amp Preamp Outputs No Built-in Crossover HPF(40 Hz - 6 kHz), LPF(40 Hz - 6 kHz) (Chan. 1 - 4), LPF(50 - 250 Hz), Subsonic (20 - 50 Hz) (Chan. 5) High-Pass Crossover N/A Low-Pass Crossover N/A Subsonic Filter N/A Signal-to-Noise Ratio 92 dB (Chan 1-4), 95 dB (Chan. 5) Channel Separation N/A Bass Boost N/A Bass/Gain Remote N/A Fan Cooled No Fuse Rating 25A x 3 I really appreciate it.