Jump to content
View in the app

A better way to browse. Learn more.

SSA® Car Audio Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

splguy1989

Members
  • Joined

  • Last visited

Everything posted by splguy1989

  1. ok the problem was the ground. what i did was (jus temporary to see) took some 4 ga and ran a ground from my front battery to ground on my amp, and still using the frame ground, now i will put a new vid showin some real flex without my amp cutting off
  2. notice the first vid amp cut off again, done big 3 and never goes below 12v continuously jamming, using 0ga amp wire, i sanded ground down good, what can it possibly be, i need even a better ground??? the gain is close to half did it by ear, and subsonic around maybe 30, lpf around 80 - 110 i believe also comment on vids itself thx
  3. Triangle rented it outta redbox didnt understand or anything, very gay movie
  4. hey, since that fixed it enough to stay above 12v turned up for a long time, can i have it stay at above 13v just by adding a cheap ole energizer deep cycle marine batt???? they like 60 i believe, but using same alt and everything, with that extra deep cycle batt keep steady 13v, since it will hold a steady 12v with big 3?
  5. i just had enough 4ga wire to go from the alternator to batt, and frame ground to batt result MAAAAAJOR IMPROVEMENT, it does not cutt of ANY more, and before going down to 8-9v now it goes down at the LEAST 12v at a steady high volume, and actually its QUITE a bit louder believe it or not so that fixed THE prob I AM A try get vid ASAP i need a mem card for my new nikon cam, and went to walmart and they said they didnt have any for a nikon
  6. well give me maybe 15 mins or so and ill go do THE big 3 and reply, thanks thogh bro
  7. No not really. Do the big 3 check your grounds Make sure you battery is good That is not much power, you have other problems, but if you keep running it at 8v it will die a smoky death. Your amp is probably already damaged and will never put out the power it did when new. really can be damaged it only did it 2 times so i quit messin with it, ill do big 3 but i only have extra 4ga wire layin around will that definitelly help?
  8. soo its big electrical upgrade i need? it didnt do it with my kx1200
  9. the amp doesent even get warm when it shuts off. and yes it runs at maybe 14.4, but after a min or so itl go to maybe 8-9 sometimes go dead, and yea stock alt like 110amp and everstart batt
  10. amp : sundown sae 1200d v2 vehicle : 95 gmc gimmy small one like blazer problem : set the gain by ear, right at half way, and when i have my 15s turned way up, maybe 30 secs amp will shut off but come back on maybe 5 secs, it only does it turned way up after 30 secs continuously slammin and volt may go down around 8 or so and jimmy went dead some of those times. so what can it be????? need extra batt in back or what makes it shut off?? when i fix the problem ill post a vid under video section, loudest cvr 15s ive EVER heard for just 2 lol
  11. LOL there are crazy ppl in this world i say the lanzar amp is equivalent to this
  12. i LOVE my sae 1200d v2, most powerfull 1200w amp ive ever had, honestly it seems to push a bit more than my memphis prd1000.1 and my kicker kx1200.1 first sundown ive owned and will be the only amps i run again the sae 1200d GREAT AMP!!!!!
  13. i just flipped it over and there isnt a bar code, but yea i just ordered it last friday night from ssa store, already here lol
  14. YAY my sundown sae1200d and nikon camera. couple pics, also is this a sae 1200 V2? cause it just says 1200d i was jw
  15. does anyone know anywhere abouts how long it take to get from gulf shores alabama to tuscaloosa?????? i wanna get my cvr 15s metered in my jimmy, have no clue wat itl do, but ill have the sae 1200 buy then, used to have kx1200 and it was very surprisingly loud, but i never had anything metered so i wanna see wat my 15s will do lol, does it cost to get metered never did it?? i may go
  16. i had a memphis prd 1000.1 long time ago and the wires ACCIDENTALLY touched. that was just a quick huge blue spark, but the amp was fine, although they just toughed like a tenth of a second, if your wires was toughing the whole time i really dont know, dout it would be good news though, id just try any sub just to see if its ok, and then uninstall the amp till u ready for subs again
  17. srry for another post lol but....... GREAT NEWS my sundown amp got shipped late last night, and it says at fedex tracking it is ON TIME DELIVERYYY for 2marro, the 12th....... cant wait!!!!! very surprising lol just for that i will really prob order another sae 1200d v2 within a month, may need better subs than the cvr 15s running 2 1200dv2s though lol, may purcase 2 D2 SSA 15s one amp each sub, or maybe 2 D2 IA death row 15s one amp on each sub also jus not sure outta those two....
  18. thankyou sir i wouldnt care if it took 6 months lol, cause i know i will end up receiving a great product lol im glad i finally found a good internet dealer with GREAAAT brands of products with great customer service, even on the forum!!!! WILL be ordering from SSA again, thx
  19. well thankyou, also for quick responce, cant wait for that sundown amp lol
  20. im new here, and i was jw, i ordered a sae 1200d v2 from the ssa store and i was just curious how long it usually takes before it shipps, no hurry though thankyou

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.