Everything posted by splzx3
-
how many d3100?
.5
-
how many d3100?
i was thinking around 5-7
-
how many d3100?
stinger 240 amp
-
how many d3100?
it not that i have to ask i just want to make sure
-
how many d3100?
will i need for 8 Crescendo Audio BC3500? thanks
-
14k qustion
no im not saying that do u know about 14 volts system? it need 16.5-16.8 volts to charge them. so plz if u dont have anything to say that will help me plz dont post...thanks
-
14k qustion
i wanted to know it the 12 volt one can be ran on a 14 volt system with no problems or would i need to get the 18 volt one thanks
-
spl zx3 build log
sorry my ex got my 2 spell it like that
-
Tucson AZ MECA Show 6/6/10 Highlights.
here is the video i got of the civic inside the civic
-
spl zx3 build log
thanks any one want 2 see video go to my youtube page just look under 01zx3
-
spl zx3 build log
i just just watch that lol that show was bad ass and thanks for the demo
-
spl zx3 build log
so when 2 my first meca spl show here are my lt meter runs (note this was my first tym doing this way) run #1 run #2 run #3 i took 3th in my class (street 4) sorry for all the posting this is off *****.com and i wanted 2 bring it over here
-
spl zx3 build log
ok i started doing my door pods this was the idea 2 start with then when 2 this old tee 2 wrap it how it sit with it hanging on the door started 2 coat it with my new fav top xD still need 2 sand then put bondo (spelling) on it speaker grill or no (the grill will be painted 2 match the inside of the car)
-
spl zx3 build log
so i got some pics of the rim be4 and after a bath i changed it up (i think it looks better this way) got some tail light tint 2 be4 after 2 coats some tym after drying note the tdh xD
-
spl zx3 build log
im done working on the system for now so i started 2 paint my rims this is be4 i cleaned them i did not get any pic of them cleaned (sorry) here is them taped off and the first coat of white put the rim back on (dont need 2 piont out the paint...i know) the new and old :yahoo: some pic of the rim
-
spl zx3 build log
i put the horn box back in and warped it up how my amps are laid out till i get a other rx2400 and when 2 get a soda not more then 20 mins ago and sub stop working and i started 2 smell that evil smell (note be4 u say i was cliping them...my gains are all the way down and when i did have them up i had tune the amp on a o scope) idk if i have but a pic of the rear battery but here (thanks enemy for the hook up :good:) the 05 type r basket and the new alt
-
spl zx3 build log
a pic inside the port on top of the port and inside the box some pics for the work i did 2day still need 2 get the last part of the paint done got my 240 alt last night and had 2 w8 2 to it put in so here is the lil pics i have
-
spl zx3 build log
where the xover might stay im not sure yet my puppy watchin out when i work a pic of my port lol just a idea of the box all the wood be useing the bottom painted for the port a pic of the port the front and side of the box just a pic of the box and the ass of my car lol
-
spl zx3 build log
2 of the 1/0 holes with some Bushing here is all 6 holes from a top view and the bottom my bass knob (perfect fit i can put my seat where i need and still have room 4 it) where my battery is restin at =( well got 3/4 of my 1/0 ran 2 day and got some lil pain in the ass stuff done 2 this was last night's work to days work my spot 4 my amps 6" tall just a lil under the top of the seat
-
spl zx3 build log
missin 2 fans had 2 take the seat out 2 run the speaker wire and rca and make the holes for my power and grounds (not done yet) how the wires are ran (cant tell there is any xD) here the power wire is goin 2 be at 30 feet of 1/0 black,15 feet of 1/0 red,50 feet of 16 g,7 feet of black and red 8 g my dad tryed 2 use it 2 drill the holes with my box in there
-
spl zx3 build log
1 of the ground for the big 3 other yellow top (for now) just a random motor shot the rx 2400 a idea for my doors a must have tool the 2 amp i have 2gether
-
spl zx3 build log
my sister oldest kid with my frame where my amps will be at my box with flex-stone me with the frame amd just some random pics my plan for (8) rx2400 did not go 2 plan ( no room) go im down to six of them start of the new amp rack 2 fans in each "brace" 2 fan in each area one of the 6 amps (w8in 2 get the others) (2 in each area) volt meter (not done makein it look stock) new head unit
-
spl zx3 build log
here is some pics of how the wires are and some amps pics my amp rack something like steve did there will be 6 more fans on the middle one 6x8 down to 6 1/2 my new 6 1/2 (planet audio big bang) one of three four ch amp with a 6 1/2 and the cross over my cross over size 2 my amp
-
spl zx3 build log
this pis can tell u wut i wanted done this was done in a rush and came out all shity wires holes 2 close 2 the amps i did not like the plan wood look so i got some black paint and had fun this tym i took my tym and got it all done right (wirein it all up) i need a relay for my amps and eq and i have 2 get some more 8g and that will be the same as the other wires
-
spl zx3 build log
my dis. block (4 now) the wires cleaned up a bit the subs and amps well i got some tym 4 me and i wanted 2 clean up my wires and other stuff here are some pics 4 u guys and the rats nest lol some pics of the stuff in my car (orion 500.1 and a 300.2) alpine type r's 12" orion 5x7's and a ssl eq (it was free xD)