basshead7890

$500 is my budget including shipping and in a 4 to 4.5 cubic feet box powered by a hifonics brz2400.1d . I was looking at the 15" btl, 15" xcon, and the 15" zcon for $30 more. I'm going for spl, i just want it to be loud. also i look at 2 ssd 15 is a slightly smaller box then recommended. what are you suggestions/recommendations ?

Do you still have those wallpapers?

hopefully they will start making them soon

Compare the BL 10 to the SSD 10 and the ssd has the same xmax so wouldn't it move the same air therefore being the same. and on the website it say the bl has 18 mm xmax and the ssd has 21mm so wouldnt the ssd be louder then?

Anything new?

Are the SSD Neo magnets gonna be shape like the BTL?

When are the new SSD subs gonna come out?

I have the hifonics brz1700.1d for about 7 months now and i've ZERO problems with it. Its great would recommend to anyone. i have the fiday x 12s now and they slam and im gonna get the ssds too this summer.

What are some non main stream brand subwoofers? like fi audio, or dd audio, or t3 audio. not like mtx or jl or kicker

2 xcon's are $841 2 ssd's are $415 around 400 is my budget

to be loud under 400 dollars and fit in a 95 accord and 1700 rms or lower. 2 ssd's are $415 shipped 800rms each

are audioque any good? is there a big difference?

is there a bid difference. how do the compare in quality and loudness. which one would be better. the audioque are 139 and the ssd 179. any other subs within that price range that are loud?

Where can I find some box cutouts for the old school black fiday x series 12". Can I use the new X cut outs or can I use the ssa dcon 12 cut outs. the dcons look like they are the same as the black fiday 12".

Are the Black FiDay12 still available? If so would it better to buy 3 and put them in the maximum size recommended box or buy 4 and put them in a smaller then the recommended box size? what would be louder?

will the 2 batteries and amp be a strain on my stock alternator? or did i just waste my money on another battery and should have got another alt

so if i install the 200a solenoid with the 2 batteries i should be fine and everything hook up it wont have a huge impact on my stock alternator?

man this stuff is confusing poeple/websites are contradicting each other, so an isolator isn't the same as a solenoid? where do i find a solenoid? BWD Starter Solenoid http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Starter-Solenoid-BWD_18970440-P_N3063C_A|GRP2020A____ or BWD Continuous Duty Solenoid http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Continuous-Duty-Solenoid-BWD_18970418-P_N3063C_A|GRP2020A____

how do i figure out what size isolators i should use, is a 80 amp isolator good? (http://www.sonicelectronix.com/item_16885_Stinger+SGP38.html) i have a 95 honda accord stock alt and battery

I just bought the hifonics brz1700.1d and the Shuriken SK-BT60, do I conected like this and ground the second battery to the chassis. I have a 95 honda accord

I just hooked up my equalizer and i taped into the head unit ground and power wire to power the eq and when i start my car i hear the engine noise ? how do i stop this?

its a 95 honda accord with a stock 80amp alt, so the HC1400 and the stock battery wont be a strain on the stock alt,

Would it be better to install a kinetik HC 1400 and replace my original battery or could i just add a smaller kinetik like the HC 600 and have my original battery and the kenetik. im on a budget and it would be a lesser dent in my pockets if i had the smaller kinetik also will my stock alternator be able to handle either one. or do i have to upgrade that too? im getting the hifonics brz1700.1d amp and i dont want any voltage drops, cause it already drops with a sony xplod amp

How do you prevent clipping, like prevent your head unit/source from sending a clipped signal and your amp from clipping a signal

how does the source/head unit send a clipped signal, or how do you prevent it from sending a clipped signal