Tirefryr

Happy Berfday Homie!

I guess it's time for the Cobra to come out.

Come out of work today, flat tire. Grab the spare, jack sinks in the asphalt. Move the car, same shit. Move the car to dirt, hard dirt, but still not enough. Grab some wood, BINGO. 45 minutes later, spacesaver is on. One problem. . . It only has 10 lbs in it. Damn. Pimp it to the gas station, $1.00 for air. BULLSHIT! Fill the tire up, take long way home cuz I can't go over 50. Get home an hour later, grab the tire, plug it, put it back on, spin it, feels like the bearing is catching. Disassemble again to inspect the bearing, it is well. Go to turn the piston back in on the caliper and notice the boot is pretty much non-existent, no piston movement. Shoot some PB blaster on it and let it sit for 5 minutes, it finally breaks loose. Turn it in far enough and line up the mark, re-install pads and go to put caliper back on, sliders are frozen in place and both boots are gone. Scrounge around the garage for some new boots, find some, spend another half-hour with the torch freeing up the sliders, gring all the shit off them, drill the holes clean, grease, boot, grease, install caliper, pop the tire on, go for a test drive, COOLANT HOSE EXPLODES. What a fucking day.

Very nice!

I would too. That must be nuts, cuz I know you're tuned a hell of a lot higher. Would LOVE to see the cone action on that!

Welcome to the Hotel SSA.

HA Ha! MY girl is so dumb. She pissed me off earlier, and we get home and she goes outside and smokes a fat one. I hear her fall off the porch into the grass. Dumb ass. Now she's sitting at the bottom of her stairs puking her brains out. Serves her right.

I actually like the paint, but the rest, right. . . Good job Sean!

Were you guys screwin? I wouldn't have even bothered to stop.

Goodnight all. Have fun west coasters!

At least you left out "it" Some people were trying to be creative earlier and actually modified my post while replying. I inconspicuously re-edited the posts though. Having Mod powers is fun some times. I LOVE to PWN the spammers and people screwing around in the classifieds. It's kinda fun to just edit someone's post, then when they read it, there's some clever little phrase.

There will be more.

Why not? If she's too leery about it, just poke it in when she passes out.

OH boy, I can hear the threads at other places now.

Did you get to try that stuff?

I'm sure there have been other to get some. Elias could attest to that, but they are the only drivers I've ever seen with them.

MY post. Not if it's solid cable. Stranded cable with more strands means more surface area and a better path for the electrons to flow. As for the cheap cable, I had a buddy buy a 1/0 kit off Ebay for $20, and yeah, 1/0 of insulation, cable was about 6. Nowhere did I state stranded is better than solid core. I simply stated, that stranded wire with more strands has more surface area. Take THHN versus DLO cable. THe THHN is a few large strands, while the DLO is exactly like "welding cable" or common car audio cable. It has more strands therefore more surface area. I happen to agree that a solid core wire is best. If it was feasible, buss bar would be the best option.

ESPN.

So much for D Wade being sick.

sounds like a personal problem Creative edit. Unfortunately, the mods skills allow me more creativity.

Who said that? If you were speaking about my post, re-read it.

I can't keep up anymore.

Sweetness my man! Speaker pimp!

YEAH!

BTW, nice wing.