Tirefryr

http://www.diysubwoofers.org/dipole/

GTO was/is a flop.

IT's cuz of the G6.

I like the new Bvilles!

I have a long day at work tomorrow.

My old Cutlass.

Kent, that really would be best. There are so many variations of each that it's going to take an article to explain. Brian Steele's DIY site has some good info on them.

Might start on the Treo enclosure tomorrow.

I'm beat. Ready for bed.

www.dickincherry.com

The baffle is just what is used to separate the front and rear waves. Technically, the board they attach to the PNON would be considered a cone as it is what is actually moving the air. But then again, technically it could be considered a baffle as well being as how the sheer size of it would ultimatelt provide the separation. SO either way you look at it, could be either one. We'll go with Dan's rendering as a Dipole driver.

Or I guess they would consider the "cone" the baffle.

No, Dipole would use a driver mounted on a baffle. No baffle needed for the Parthenon.

Finally tested my other Alpine today. 1 blown channel. Figures.

SB is actually a decent game.

Isn't the Parthenon just meant as a bipole driver? Don't think that would work too well in the automotive environment.

You're right on target there. Another amp can always be added if needed, but the Magnum will work just fine on 600 watts.

The ribbons can play lower and to me have an edge in the detail department. They are also very sensitive and disperse the material over a rather wide field. They are quite easy to damage as well as there is just a small film or membrane that vibrates and it is prone to damage from even slight over powering. I have read also to always use some form of passive component in-line with it as an elctronic filter is just not enough. You need to increase resistance or something or other. I think Madisound has it pretty laid out, out Zalytron. That's all I can tell you from my own experience though, which is limited.

Quite well. What's the application?

Hey Kent, could you take a scrap and photo the mirror for me? I'd like to see how clear it actually is.

Kent should have some nice mirror scraps you could use.

YO!!

PEACE!