pmureika

Than why did somebody say 95 amps.170 shouldnt be problem if wire size is o gauge to the amp.

From what I have been reading its better to know the head unit voltage its more reliable.

He needs to know the voltage output of his head unit. Not if he's using this method. Dont agree . And why not? If you play a 50/60hz tone on your headunit, turn the volume up to 3/4 volume, plug your dmm into the outputs of the amp, turn the amp to ac voltage, and set the gain to the given voltage. Why would you need to know the voltage output of the amplifier?

He needs to know the voltage output of his head unit. Not if he's using this method. Dont agree .

He needs to know the voltage output of his head unit.

Yeah that was basically my point. It will be in the box by the end of this weekend because I am busy with school. Any ideas about the gain? Use a dmm to set it. What is the volatage im looking for though, from my OP I last used a 60hz CD and set the gain to around 30 something volts. Where can i calculate this voltage. do a search on the internet the have graphs already made up. 50 hz for a sub. plus what is the headunits output 4volts?

How many amps is your alternator ?

Any other relatives around to help?

Yeah that was basically my point. It will be in the box by the end of this weekend because I am busy with school. Any ideas about the gain? Use a dmm to set it.

I know Jacob has great customer service skar?

I have used both the sa12s and the vvx12s on a aq1200d and you couldnt tell the difference. Would have had to use a meter they are both good choices.

my volt meter wouldnt work so i used my buddies and hes not home. ill try check it again today. but i know at the battery, with truck on, subs blaring, i was getting 13.3 and that was the lowest it dropped. with just truck on at idel no subs, i was getting 14.0 But when you measure at the amp it will also take your wiring voltage drop.

Check the voltage at the amp with your system on.

Keep up the great work

title edited thank you

I kind of figured that.

I have a box desighned for two 12 dcons could two12 skars work in same box? dcons not decons

Does the amp have a subsonic filter adjustment?

So are many other subwoofer companies, amplifiers, instillation accessories, head units, etc. I'm not quite sure why this is always a huge topic on SKAR woofers when they are indeed produced in the SAME buildhouse as Sundown, what makes them so different? Anyways please keep this thread on topic. Thanks, Julian i guess he dont no that alot of car audio is made in china lol alot of people like to hate on skar

why dual 2ohm?

My best adivce is read.

I think your only solution is a recone. Also learn how to set gain using a dmm. Your young use the internet to learn and people from this forum there are some smart guys and girls to find out where to look,

You could try Metra they are a company that makes adapters. I looked around your going to have to make something. good luck

You could try Metra they are a company that makes adapters.

Mad relative. {This will be the last post about this.}