trod2902

3 D1s VC wired in series, subs parallel = .67 ohm load

i think theyre still pretty swamped right now because the steel delays put them so far behind. Give it time, theyll get your sub sent you just have to be patient. I think all the Q's have been sent out so you should be coming up pretty soon.

I bet your patience is tested nearly everyday nick lmao

lmao i guess ill try anyway since i have to recone it whether i try or not are there any CA glue solvents?

is it possible to detach the spider without cutting it, repair the tinsel, then glue it back?

Thats it ^^ its in the box i built for my Bl 12 that im waiting on, i figured it would break but i thought it would be something more dramatic than that lol. I plan on reconing it to D1 anyway. can i just temporarily fix it by soldering the tinsel back on?

I was bumping my SSD lastnight when it all of sudden stopped. Everything was sounding great and it just stopped. I looked at the connections to the box and everything was fine, then i pushed on the cone and it started working again. Still, it sounded just like it should (awesome lol) but then it stopped again. This morning i took it out of the box to check the connections to the sub and everything was as should be. When i would push the cone it would jump but stop working again. what the hell could this be?? also the tinsel leads, spiders, and everything else looks fine and in place.

i have an 08 Nissan titan crew cab and it has the most room of the trucks i have seen (chevys and fords), the cab overall is just huge. if you want to go big you can build the box to angle the seat up a bit and it will still be comfortable to sit. This is how i have it. Honestly i think with an efficient design it might be possible to put four tens and still have a comfortable seat. Ill be putting a Fi bl 12 under mine as soon as it comes in. i have some picture of a box design for it in the fabrication section, it can stil go wider if i want it to also.

that woulve been great lol o well i have more time to work on a new box now that my bl is being built haha good luck with the btl, maybe this one will suit you a little longer haha

Pic 1 this is the front of the box that will be facing the front seats Pic 2 this is a view of the back/underside of the box. Pic 3 This is a back/side view of where the 4" diameter aeroports will go Pic 4 this is the other side The sub will be downfiring towards the back of the cab at an angle and im curious of how this will sound. im thinking that since the ports will be loading off of the door as well as the sub it should be a pretty loud design but i would like some opinions since im new to box building. i wasnt able to insert the actual image

the btl has a neo mag which is actually smaller than the bl but does have a deeper mounting depth so keep that in mind. It sounds like the easiest route since you can use ur same box. i say go for it

Dont worry about not having enough power, they will work fine.

i cant vouch for them personally but people say great things about the dcons. Also you can check into the SA-10s, sundown carries some of them b-stock at a great price if you are interested. If youve had the same sub for six years why not go with something a little different?

what will you be using to cut the wood?

how much room do you have, maybe an 18 btl

if its 1 ohm, maybe try to find a used alpine pdx 1000

from that link it seems that the type of wood glue doesnt matter much when it comes to strength, its all stronger than the wood anyway so breaking comes from failure of the joint rather than failure of the glue.

An audioque 1200 is $250, Its a solid amp as well

sounds awesome, thanks for the update scott

I had one ssd 10 in a large sealed box and man did it hit the lows hard and sound very clean. a suggestion would be a fully loaded ssd 12 in a large sealed box, but this will also decrease power handling so that is something to be carefull with.

Great job Fi, thanks for striving to create the best product you can make. This transition seemed to be tough for everyone including the anxious customers lmao. I just ordered a BL 12 and im very excited. I built my box for it this weekend now its just time to wait

Does this mean the ssd's should be back soon?

Im working on a box design right now to fit under the back seat of my nissan titan crew cab, turning out to be quite a challenge lol.

thanks bro

Just what the topic says, i need to know the diameter of a BL 12 magnet.