AA-Foo

the woofer was replaced by the Team Fi Woofer 15,18 It is the new sub that replaced the Good ole BTL. either way at high current the neo it self looses its integrity and slowly looses its magnetic force...

Thats my video! yea they are easy to fix!

Update!! False Floor almost done! made it elevated and floating for air cooling and plexi window for my fuse block!!

thanks man! its alot of work!!

aw pshhh! im building a meefer cabinet ontop of my car...

Heres an update guys! Little Electrical Work 6 Runs off Singer Alt to the rear battery bank!

Lol its all the same place that creates all these amazing meefers why hate on it and just get all along for the love of audio

thank you im taking my time to make it really clean and done right!!

Guys Build UPDATE!! This Build will have 4 15s! ill think about it and we will see if i can handle that much power other then that heres a Build update we are going full force on this build hole for 6 frame grounds!! 3 grounds on opposite sides of the frame! Resistance Free!!! 0 volt! grounds are plasti dipped to prevent rust! and corrosion

thanks man!! yeah im really exited about it since i came back from SBN!! i have alot of new ideas for my build so stay tuned!

thank u kind sir! and yes im planning smart and ahead i want to make sure my car can withstand each and every bit of weight i will put in it. .. so 1800lbs of support is plenty

Heres a little update! new suspension! 1,800lbs capacity for rear and battery bank along with amps and wall should be plenty!

Ive never taken my ns-1s to .25Ω and i am doing midwest spl

ohh ns-1 puts more power out tho at .5 ohm ive got it clamped at 7,128 watts

thanks and they are rated at 4,000 rms but they will laugh probably at my power ill be giving them 2 Ns-1s 1 on each woofer

yeah it sometimes helps but i wont really do that ill stay between 15.1 and below for demos.... and hah yes sirrr 1 ns-1 per meefer!

yeah it sometimes helps but i wont really do that ill stay between 15.1 and below for demos.... and hah yes sirrr 1 ns-1 per meefer!

i have a VCM so i can crank up my voltage to 16v for 30 second burp but its a 12 volt setup!

lol noo not the ac vents and i am doing rear pods where the side of the wall is going to sealed away from front of the cabin and do a side panels with 2 8s and 1 st 350

Just wait and see and each from door will have 3 tweets now wait till u see where other 2 are going

The amplifier has dual inputs and not all fuses will be used to fill it up I will use 4 - 250amp fuses on each NS-1 that has toolmaker dual inputs so 6 positive leads going in and it will be fine no worries lol

Stayed Tuned for this epic 20,000 watt Build Team Sundown Audio Team Fi Team XS Power This Build Will Consist of.... 1-SC Designs Wall with Pluggable Port for SPL/Daily... 2 -15s Secretive Woofers Fi Audio 15s... 12 - Crescendo Audio PWX 8s 2- Crescendo PWX 6s 8 - Selenium St 350s 2- Sundown Audio NS-1s 2-Sundown Audio 200.4s 1-Sundown Audio 125.4 1-JBL MS-8 1 XS D3100 4- XS D7500s 1-Singer 220amp Alt w/VCM 1- Custom Toolmaker Fuse Block Toolmaker Goodies, Distros, dual inputs,' 1-Kenwood KIV-701 MORE GOODIES to COME!