Dangrebel

Most of the sq competitors I see are ported.

You'll be pleased. That's it

I'm a die hard crescendo fan! I say grab the 5500!!! They are tanks man! Put out more than rated at 12.5 volts! And the price is nice too backed with top notch customer service.

Jumpers on neg and pos.

Put some tint on the lens. Or color with sharpie.

They will sound good on that amp!! I had mine on 125rms they took every bit of it

They are great comps for the price, I ran a set for a while. Amp them for sure

Man I have hdc3's. They've only popped like what you say on clipped kick drums. I hear it right at the center of the cone.

I would grab a big battery in the back, do the big 3 for sure, and grab a voltage meter.

Don't forget fuses, fuse both ends of your 0 gauge run at each batt and ground to a good solid spot preferably the frame.

Iput about 15sq ft on my roof and it is still stuck as hell. My roof gets hot as hell. I used a screw driver too. Nothing but good things from me also got a lot more in my truck and it performs great!

The x996 and prs are the top dogs on your list.

Sean, do you have any silk or soft done recommendations? I would love to know what youve heard and liked.

I forgot how big some of those tweets are haha, do you think the aluminum dome will be metallic sounding? I like how low they will play, should be perfect for blending.

Yes the onyx. Also they will either be in the kick panels or on the a pillar depending on what I like. I can't fit too big on the a pillar but I can for a 2 in tweet in the kick panel. I'll be running them off the rear channel. So I can adjust the gain more precisely.

Ok so water got in one of my tweeters and I need replacements, I'm looking for soft or silk dome tweeters that sound very smooth. I would like the to come with there own crossover. I'm not going active til a little later. They will be paired with crescendos new pwx 6.5 pa speaker. I'll prolly cross the pwx at 3000hz or wherever the crossover points are on the tweet possibly. Budget is 80 and down. They will be ran on a mb quart 125.4. There are so many choices but hardly any reviews can one of you point me in a good direction?

Well I got 2 hdc3 18's not walled in a extended cab gmc Sierra on 2 bc2k's

Same

Or rig up a spacer to go between throttle stop plate and the lever.

Word

Yes go to autozone and pick up some platinums, they are sealed agm batts, they are a great batt for the price and come with a 3 yr free replacement warranty!

Did a 149.4 on music sealed on dash Iasca style. Did a 152.4 outlaw on music and burped a 152.9 at 39hz. Did all that with a 29hz tuning on hdc3's!

The one with all the matching colors

My personal opinion on the IA comps,they are amazing for a budget set! The tweeter was a little bright on axis on head unit power. But it evened out when hooked them to an amp. I had 125rms per side. Crossed at 120hz they would get loud but lack on mid bass. Crossed at 80hz was full sounding but didn't lick the full 125rms

Do you have any low hitters like 20-26 hz? I haven't had a chance to download yet. I'll post a vid up in a few days