Everything posted by Dangrebel
-
IA Recommended Enclosure Sizing
Depends on peak of vehicle mostly.
-
how do you have your remote bass control routed?
Under center console to the spot I mounted it.
-
different vechiles and planel flex and vibrations...
Well most foreign cars have smaller support structures and are designed to crumple on impact, have thinner panels to make it cheaper to manufactur. My gmc Sierra on the other hand is a sturdy son of a bitch. It flexes the doors and roof so bad but has only a centimeter of windshield flex.
-
Help! Screws keep backing out!!
Could it be because the panel has a slight deviation in it? From to long of a brace and the Front panel is flexed out?
-
Help! Screws keep backing out!!
Ok so I used bigger drywall screws and it actually held up longer but then did the same so, t nuts it is?
-
Help! Screws keep backing out!!
Well the first time I discovered this was because all at once my sub started flopping and I look and a screw broke. So then I did as mentioned earlier.
-
Help! Screws keep backing out!!
Ok here is how I started, I predrilled with a small bit and used 1 5/8 deck screws nickel plated. They dont pullout they just unscrew them selves.
-
Help! Screws keep backing out!!
I just re drilled and screwed before making this thread. Still did the same thing.
-
Help! Screws keep backing out!!
Well I'll try the larger screws and glue and I'll report back
-
Help! Screws keep backing out!!
What lol it was just until I build my other box.
-
Help! Screws keep backing out!!
It's a single baffle but it's braced to hell and back if the super glue doesn't work then I'll double baffle for sure
-
Help! Screws keep backing out!!
My screws keep backing out of my box and my sub starts slapping up against my box. Only 1 does it and not the other. What's my solution? I have to tighten them everyday! They are 2 18 hdc3's
-
broken fi bl i need HELP!
I've overdriven every sub I own and don't have problems! It is user error, you just need to know when to back off the volume!
-
Dual 2 or dual 4?
1 ohm so buy dual 2's, it's just better for the amp!
-
Rebuild time,12 18" death rows
So this is how earth is supposed to blow up in 2012...
-
baffle or not?
If its braced properly, I wouldn't worry about it.
-
Dcon 15" for lows?
The tune is decided by what kind of music you listen too. Do you listen to screwed and chopped?
-
Dcon 15" for lows?
Oh yea!! Get ready for it!! What's your box plans for it? The enclosure is what makes the driver play low!
-
My thoughts of Second Skin Audio as a company
Did you ask them about it? After you saw they didn't give you a discount?
-
Valued & VIP Store Customer user groups
Order #2275
-
Port placement in jeep?
Yea I think that's what I'm gonna do. This damn rain is puttin a damper on my plans.
- Port placement in jeep?
-
21" Warden any good for daily on music??
I forgot. but I would have done it if I didn't only have 340$ when I bought it
-
21" Warden any good for daily on music??
well they asked me if i wanted one for my bc2000d so... lol
-
21" Warden any good for daily on music??
If you got the electrical it'll be fine, you can buy a 2 yr .5 ohm warranty from crescendo so I don't think it would hurt it.