Dangrebel

I would love you forever if you checked them for me!!!!

Can anyone run these specs please?

Haha!!! Your right but that bish pounded the lows!!!!!!

I know it's silly but I was only doing a 143.7 sealed up with 1 hdc3 18 and a 30 hz tune haha so I'm expecting more I just don't wanna shoot to high

Ok im sorry i messed up my Specs. Here we go: 51in wide, 38in tall, 24in deep. 1.5in mdf all the way around. Interior space is 20.46ft3. I will be bracing with 2x4's and came up with 1.2ft3 for bracing, so im sitting at 19.26ft3. And after sub displacements (.35) im at 18.56ft3. My port will be 8in wide and 35in tall (wood thickness is accounted for) and 18.2in long. The port takes up 3.4ft3 so now im at 15.16ft3. Which is 7.58ft3 per sub which i believe is perfect. Please run that again if you can

haha yall are cracking me up!! And yea I feel like they are some of the sexiest subs besides the LMS ultra of course and the ALL MIGHT FUNKY PUP

i just dont like .5 ohms per amp, Hell idk if i get my electrical beefy enough i will!!!! hopefully it will get loud!

haha hell man come on ever theyll show you a good time!!!!

Anyone? I just need spec confirmation!

My new hdc3 18's

Wassup guys, I just got in my possession 2 18 inch Aq hdc3's bnib. I will be walling my truck and my deminsions I came up with are 51'' width 38'' height 24'' deep. With 1.5in thick walls, I get 20.4 cubes. I gave my self alittle wiggle room for the height and width. I will be tuning to 36 hz with a 9x38 port that is 20.5 in long. It will be braced and before bracing will come out to about 8.2-8.4 per sub, that is after port displacement. If anyone could run those specs I would greatly appreciate it. This will be going into a 2000 gmc Sierra ext cab. They will be powered by 2 crescendo bc2000ds at 4ohm strapped daily then 1 ohm strapped for comps I'm looking for mid 140s hopefully I can achieve that. The port will be on drivers side. The subs will be stacked on passenger side off center. Help a brotha out!!!!!!

If those motors have pole vents I would leave some room between them and the seat

Yea, the 18's have more cone area and will handle more power. And I thought it was a decent trade. I want more of a spl/ bass race machine and he wants a badass daily system.

Yea, I used it for 1 month.

Welp just traded subs, I have too brand new 18in hdc3's and so I will wall my truck I hope. They will be powered by 2 crescendo bc2000ds at 1 ohm bridged for comps and 4 ohms for daily

Happy birthday man

Haha ole virg.

Holy hell I'm jelly!!!!!!!

Thanks y'all!!!! I love it especially if I spot a cop and don't wanna turn the lyrics off I can just switch of the sub!! It's awesome!!

Some pics of it installed Switches off Switches on

I would like to see more port area but other than that!!!! You have now joined the 21 club!!!!!! I salute you!!!!

You have alittle over 6.5 cubes for the subs. So about 2 cubes per sub then 2.5 cubes for port and some bracing sounds good to me

Badass setup you got man!!!!! That xcon should get loud!!!

Should have pics up in 20 min

Ha appreciate it, I whipped it up in Like 25 min!! Yea I kinda wanted to see the clip light, even though it's not a 100% accurate. Thes switches light up blue when you turn them on by the way.