Everything posted by turbowrx15
-
2 Dcons 10s or 1 sa12?
I know But i wanna get the loudest possible for that price range
-
2 Dcons 10s or 1 sa12?
I know i'm vs this and that but I just got some money to spend on a new system and cant make up my mind
-
Enclosure for single SA-15
agreed use an aero port.Ported is the way to go.
-
1 10 l7
02 subaru wrx sedan opened up a lil.lol center of the back seat taken out and rear deck taken out
-
2.48 cu ft. before displacements
- 2.48 cu ft. before displacements
thanks I'm bout to see if I can fit 2 4" on the side its only like 12x12 on the sides but im gonna see if I put them on opposte corners if they will fit thats not gonna work so i'm just gonna use 1 4"until i can get a 6" and just buy an extra center tube. Here's the new box!! 2.54- 1 10 l7
Different amp was used but you can see the old school audiobahn and old school l7.lol- 1 10 l7
It was gucci and master p-brinks how do you post pics cuz i cant figure it out?lol Have to upload to Photo bucket usually. ight i'm bout to post it.I thought it was loud for that sub- 1 10 l7
It was gucci and master p-brinks how do you post pics cuz i cant figure it out?lol- 1 10 l7
It was gucci and master p-brinks- 1 10 l7
Is a 139.8 on music loud for this?- ICON 12 or SA-12?
which one gets louder or sounds better?Do they even have any more Icon 12s?- ICON 12 or SA-12?
Ok Ive narrowed it down to these 2 subs going in a 2.34 cu aero ported box.Any opinions or videos on the icons?- 2.48 cu ft. before displacements
thanks I'm bout to see if I can fit 2 4" on the side its only like 12x12 on the sides but im gonna see if I put them on opposte corners if they will fit thats not gonna work so i'm just gonna use 1 4"until i can get a 6" and just buy an extra center tube.- 2.48 cu ft. before displacements
thanks I'm bout to see if I can fit 2 4" on the side its only like 12x12 on the sides but im gonna see if I put them on opposte corners if they will fit- 2.48 cu ft. before displacements
ok cool.Could you help me figure out how much displacement 1 4" port would be 2.40 is the displacement after the sub and for 35hz 9.60 of one 4" port is required using psp-inc calculator that dont seem like enough port to me should i go with that number or what?help please!!lol- 2.48 cu ft. before displacements
Should be fine. I have my GF's 12"s in 2.5 each. Is that b4 or after displacement?- 2.48 cu ft. before displacements
and I just got done building it.Came out to be 2.54 cu ft. before displacements is this gonna be too big for one 12"?- 2.48 cu ft. before displacements
It's well worth it to make it work. Should be a noticeable output difference. I could always take the 4"out and put the 6" in but i think it requires 21 in from one 6" and it only comes like 18 in. What would the 18" long tune to? about 40 or 41 oh and it only comes 17" or maybe two 4" aeros? I have an extra center tube to add to them they require 21" each- 2.48 cu ft. before displacements
It's well worth it to make it work. Should be a noticeable output difference. I could always take the 4"out and put the 6" in but i think it requires 21 in from one 6" and it only comes like 18 in. What would the 18" long tune to? about 40 or 41 oh and it only comes 17"- 2.48 cu ft. before displacements
It's well worth it to make it work. Should be a noticeable output difference. I could always take the 4"out and put the 6" in but i think it requires 21 in from one 6" and it only comes like 18 in.- 2.48 cu ft. before displacements
It's a 02' subaru wrx sedan and i was gonna go with one 6" aero but it would be too long and the center folds down and i'm gonna put 2 end pieces of the aeros in the rear deck where 6x9s would go- 2.48 cu ft. before displacements
Ok well I'm building my new box for one SA-12 it's gonna be 2.48 cu. before port and sub displacement.I'm gonna use one 4" aeroport.It's gonna be sub back port side going in a trunk car tell me what ya'll think?- From: Sundown Skar or Incriminator?
thanks I will keep that in mind when I build a new box- Sundown Skar or Incriminator?
thanks I will keep that in mind when I build a new box - 2.48 cu ft. before displacements