Fi Car Audio

Please send me pics of it to [email protected]. As Im not usually building the subs (setting coils and maching all parts now) so I dont see everything that gets finished. My guys are always really good about parts selection, but I do have two new/newer people that might not know or pay as much attention as my other lifers do. If you arent as concerned about the cosmetic side of things, Id run it as is. If it ever becomes a problem Ill gladly send a free kit out to replace it or you can send it it for us to recone. So... I guess that means if you ever get a wild hair and decide to beat it to death, you have a get out of jail free card Send an email so I can keep track of it for future reference.

Let us know your box and set up when its going... and pics for everyone if you can Thanks for the order.

Yes they are. They fit the "smaller" 8awg with a good twist to them, but some of the "bigger" 8s you will need to trim a little off the OD.

Got a bunch built and will talk to SSA about getting them up for Monday

Thanks for the order. Please keep us posted as to how it sounds (and how much it makes the Mercedes sag in the back from the weight )

We can get it fairly close, and it will look rather close if you stick the other dustcap Ill provide over the original. The cones and surrounds are similar, although I am using parts I prefer and find to be better and more durable overall.

Its in my sent file... Ill forward it again.

I think I got back to you yesterday regarding this one. If I havent email again to [email protected] or post here with your email. We will get you taken care of ASAP. Thanks, Scott

Aw heck... Ill do it Send an email to [email protected] with "GASKET ATTN SCOTT" as the subject with your address and Ill let you know the total for it. Thanks, Scott

Should be fine for that. You are running the two opposite sides of things for most people. Ported-rap, sealed- tighter kicks and double bass. Im sure there will be a few people on here that have similar taste and can give you their recommendations.

Burps is a VERY different thing than daily... I could see 10k in the right setup. 1000W for a standard BL with pole chamfer and daily tolerences is fine. No need to add flatwind or cooling if you are going to leave the power at that. Should make for a solid daily setup with good SPL to it depending on how its tuned... but maintain a good sound as well. Thanks, Scott

I have done quite a few. It should be a older short TC9ish motor. A couple different coils we an use in there and tweak it for different applications. Thanks, Scott

Pics of the system...

I have no idea... I dont pay too much attention to other companies, but they do look Chinese. Id have to have it in hand to measure and see if it can be recone or tweaked. Thanks, Scott

Almond... do you have the ultra secret hotline number? If not, please email and Ill give it to you. Itd be easier going over things via phone (and no... he wont give it to anyone else even if you bribe him!)

Back at you Carl Dom... let me know when they get in.

Does look like BP with the aluminum in the pole. Let us know how it sounds when its running Thanks, Scott

A simple stringer across the port will help or even a 2X4 from the front baffle to the port board as centered as you can get it. Design looks fine as does the size and tuning. Thanks, Scott

No one seems to have the -04 version of them anyway. Ill keep checking to find some (one company says they should have them back in stock shortly)... but at least no one has your $$$ until then. We will get you squared away. Thanks, Scott

Wow... does look to me like over excursion. We can repair it, but it will be using the newer parts, not the older ones (I didnt make the last ones).

Assassin 8" .5-.8 @ 33Hz 10" .8-1.25 @ 33Hz 12" 1.75-2.5 @ 33Hz While they will work sealed, they are not always optimal for f3 and Qtc. Arsenal 10" .8-1.25 @ 33Hz .25-.5 sealed 12" 1.75-2.5 @ 33Hz .75-1.25 sealed 15" 3-5 @ 28-33Hz 2-IB sealed Havoc 12" 1.5-2.5 @ 28-33Hz .6-1.2 sealed 15" 3-5 @ 28-33Hz 1.5-3 sealed 18" 6-10 @ 28-33Hz 4-IB sealed These are just general recommendations. Tunings can be pushed up or down depending on application/listen preference. Thanks, Scott

Please send the sub in to: Fi Car Audio Attn: Scott 5480 Cameron St #107 Las Vegas NV 89118 I can recone them, but I dont think I have the original cone for them (same cone body, different surround). It will be a slight mix of old and new, but perform the same. I will say that 400W is too much power for that little sub... but I believe Chad used to rate them at 350W, stating that 150W is a good number to use for daily (or something along those lines). Thanks, Scott

Sorry... USPS. They should be there tomorrow or Friday (given standard ship times) They have a shipping confirmation on them as well. Black baskets were drilled for terminals and I gave you a couple of extras as well. Thanks, Scott

Length would depend on if its a free standing port, or using 1 or more sides of the enclosure. If for some reason the 6X10 port uses 3 sides of the enclosure, then about 29" would be correct. If its free standing then 32 and change would be. Im not sure if some of these programs take end correction into account or not... WinISD seems OK for most of its recommendations and I tweak from there slightly depending on port orientation.

Yep, Tom is running his sealed in about 2 cuft each... a wee bit on the small side too me, but for those that have sat in it, it drops deep and clean for sure. 5000.1 is a bunch of power to 4 of them. Definitely looking at adding the BP to keep them alive with that.