rcmobile

well i may build a 16volt bank for it, and it is being hooked up from a friend that owns a shop so no money involved

what is hda i see that all the time? sorry for the dumb Q

would two 18 fully loaded BL's take the soundstream xxx-6500 amp? they are ported of course tuned to 35hz with two hifionics clossus one on each, they wang hard as hell. but just wondering if this amp would be too much? it is 4800 at 2 ohms and 6400 at 1 ohm but i have been told they were much stronger than rated but with voltage drop i should be around that range>>> should wang i think

one other thing, if i wanted to flush mount on the top baffle, what size would that be

that is what size i was thinking but wanted to ask to be sure. thanks

just like it said up top, what size do i need to cut the holes for the 18" bls thanks

ok i will still go with the 22 then, right now the bottom, back and both sides are done, and with 45's in the corners. i did take pics and late tonight i should get to work on it a little more. thanks for your help

yes thanks that is what i am doing, just didnt know if i need to change the 5 high or the 22 deep to be in that range,,,thanks for you help. im building it now and at that point...lol

steve meade!!! his videos just made me want them..lol

well lets just say subs take up one, and give a little for bracing,,then the rest would be what ever size the port takes up.

well before subs and port and bracing it is 19.367

thanks to everyone that has helped me so far, i am finally building the box for the tahoe and i had to change plans just a touch. it was gonna be 48 wide, 21 tall and 36 deep with a port all the way across the bottom so port was 5 tall 46.5 wide and 22 deep i changed the box size to be 48 wide, 35 deep and 23 tall this is for two 18" fully loaded BL's with 1600rms each how big should i make the port to be tuned to 30-32 range

well that is what i wanted, i will finally start the build tomorrow

been working too much but while i couldnt build i been asking around, i am ready to build in the morning but wanted to ask one more question if i make the port all the way across this bottom will the make any port noise being so big as just one port. i am ready to get busy so i can be the next the break the mirror that FI's seem to break these days.

well due to some after hours work i wont get to start till this weekend but i will take plenty of pics