Everything posted by clab333
-
SQ 15" Subwoofer
Lmao not hearts. Inolect
-
SQ 15" Subwoofer
Yea I got ya I'm right where airline goes under the interstate lol. And the dcon 15" is only 300w rms and that's kinda pushin me away. Right now I'm running a shitty hifonics 1200w amp but it lasted longer than my sundown 1200 lmao.
-
SQ 15" Subwoofer
I live in Watson but I work in br on airline. Where I'm at now lol.
-
SQ 15" Subwoofer
Yea what does the dcon compare to? Like i see it's pretty cheap but is it good for the price? And mb bassahaulic lol
-
SQ 15" Subwoofer
I kinda want to get a crescendo amp and try that out and I'll get whatever power i need to fit the sub.
-
SQ 15" Subwoofer
Mine sound great right now I don't have a problem with them. I just want to try a 15 and explore different subs pretty much.
-
SQ 15" Subwoofer
Yes I want a quality sub, I have no care for spl right now. Don't worry ab the build of the enclosure it will be taken care of I guarantee. Basically asking for the best sq 15 around 200 bucks.
-
SQ 15" Subwoofer
Isnt the FI Q 15" like $300? If so idk if i wanna spend that much on it...
-
SQ 15" Subwoofer
"Will be most likely going in a ported box in the trunk of my altima."
-
SQ 15" Subwoofer
Looking to get a new 15" sub to replace my 2 SA-12's. I am very pleased with them, but i am just wanting to try something new and have been itching to build a new box lol. Looking for sound quality over anything else. Price range is around $200. Will be most likely going in a ported box in the trunk of my altima. Just wanting some suggestions of good quality 15" subs in my price range. Thanks in advance!
-
Help with box dimensions and port for 2 12s
Wouldnt that be like way more expensive?
-
Help with box dimensions and port for 2 12s
So id be good just runnin 4 gauge in those places?
-
Help with box dimensions and port for 2 12s
You just replace alternator+ to battery+, battery- to chassis, and engine ground to chassis cables with an upgraded gauge wire basically right?
-
Help with box dimensions and port for 2 12s
Is it the big three hard to do if ive never done it myself? ive heard of it and have an idea of it, but never fooled with it myself.
-
Help with box dimensions and port for 2 12s
Thanks guys i think ill go with the 1200w sundown amp.
-
Help with box dimensions and port for 2 12s
i have an 06 nissan altima
-
Help with box dimensions and port for 2 12s
And ive heard sundown amps are a little underrated so i think id be ok with the headroom from the underrating of the 1200w.
-
Help with box dimensions and port for 2 12s
you think payin the extra $150 for the extra 300w is worth it?
-
Help with box dimensions and port for 2 12s
yea the crescendo is about $200 more than that but not refurbished. But sundown amps are good ive heard, i might try that one.
-
Help with box dimensions and port for 2 12s
yea but if i didnt have to spend that much i wouldnt, i just wanted a good quality amp. know of any better quality amps a lil cheaper maybe that you think would fit better for the subs?
-
Help with box dimensions and port for 2 12s
I was gunna try the new crescendo 3000W monoblock but any other amp you recommend?
-
Help with box dimensions and port for 2 12s
Yea i gotcha. is it better to make it 45 tho?
-
Help with box dimensions and port for 2 12s
Ok so i would have to make the port 90 toward each sub to finish off the 36" in length i would need correct?
-
Help with box dimensions and port for 2 12s
I am building a box for 2 SA-12's for the trunk of my altima. I want to have a square port between the 2 subs on the front of the box, looking somewhat like this: O | O sub port sub Using 3/4" MDF and outside dimensions, my box's height can only have ~ a height of 16.5", a width of 33", and a depth of 16.5" (however, the depth can be altered a good bit if needed) I need to know what dimensions to make the port and the dimensions of the box itself if anyone could help. Thanks.
-
Help with box dimensions and port for 2 12s
I am building a box for 2 SA-12's for the trunk of my altima. I want to have a square port between the 2 subs on the front of the box, looking somewhat like this: O | O sub port sub Using 3/4" MDF and outside dimensions, my box's height can only have ~ a height of 16.5", a width of 33", and a depth of 16.5" (however, the depth can be altered a good bit if needed) I need to know what dimensions to make the port and the dimensions of the box itself if anyone could help. Thanks.