MKader17

That would be my preferred setup IF -you can have the 3" drives ON AXIS -the 8" driver you pick is a serious midbass beast -you have the appropriate processing to sort it out -and if you can get the 3's pretty high up and the closer to equidistant the better Well if I did it I would be putting it in your favorite vehicle ever! I could do a 3" on the dash and 8 in the door Also, I would still plan on using a sub. I know I really enjoy my full range BIB and I love awesome midbass! Something like the different i felt between my 4x6 and 6x9's to my DLS 6.5s in my old truck.

Out of 15 entry ways through out my house there is only 1 place I can put my p90x pull up bar without tearing something up

Aaron that is exactly what I'm going for.

Why would you want to do that and stray from the "norm" ? For the hipster status bro!

I'm not the type that desperately likes tweeters. My H701 is capable and I could always throw in a cheep tweeter amp down the road it needed.

http://meniscusaudio.com/images/CSS-FR125-data-v3s.pdf This are specs for my full range I went the BIB route with. Old pic from my dorm

So what would you guys think about someone doing a 2 way with a 7-8" Midbass and 3" "fullrange" Possibly worth it?

'I'm in the process of downloading the client.

So frustrated with my last prof. I fell like I wasted so much time on a stupid undergrad elective course and he gave me a freaking C! Ironically, I made an A in my graduate level class. If it wasn't for this professor and my shitty prof my first semester I would have a 3.52 instead of my 3.12.

I room with a fairy with the same said magical powers

No go in excel, it's not too friendly with 3,000,000 data points. however I use JMP and have all the counts for all the distributions (that's how I made the graphs in another program) However, I think I found another way around it to make me feel comfortable with the data.

What are you recording and what time interval and how is the data stored? I record engine speed and any other basic parameter you can think of. I plan on only testing the engine speed and calling it good enough. The data is recorded every second, but I'm looking to show that the way the engines run average out to be the "same" overall. So you want to compare RPM over time? https://www.dropbox.com/s/ldg2w6meg70rbm6/Engine%20Distribution%20comparison.jpg The left is the engine speed distribution of a single vehicle in my study. the right is the distribution of all the engine speeds for all the vehicles. I want to compare the distribution to say that it is statistically similar so studying the overall distribution instead of studying 7 individual vehicles will produce the same results with less work.

What are you recording and what time interval and how is the data stored? I record engine speed and any other basic parameter you can think of. I plan on only testing the engine speed and calling it good enough. The data is recorded every second, but I'm looking to show that the way the engines run average out to be the "same" overall.

Do you guys know any statistical test where I can test a distribution against another to see how alike they are? Basically, I want to compare "signatures" in a way Background: I have 7 vehicles that I record engine parameters for; I want to test each vehicle's distribution of engine speed to ensure that they are all close enough to the average so that I can assume running 1 analysis on the average is comparable to running the analysis on each vehicle individually.

I've heard whey doesn't work well, but I've had good luck with whey isolate. You can use either water or milk, I tend to use milk, and very very little. Try it with milk, and may have to add a scoop to thicken. I've been using the now brand whey isolate, I really like it as it doesn't have any taste so it's easy to add to just about anything, but on the other hand some cheaper vanilla flavored whey sounds good too. My next purchase will likely be both. I just saw a post on the comments for the leangains fluff that i am going to try. He said he did 3 eggs then a scoop of protein and it died, so he added more and it was worse. Then strawberries were added and it fluffed up. He is using the same protein I have so I figure its worth a shot. Unfortunately I have a one of these in my closet, that my girlfriend is storing at my place, but she doesn't want to let me use it!

I clicked!

BTW, http://www.madisoundspeakerstore.com/approx-3-fullrange/aurasound-ns3-193-8a1-3-black-cone-wide-range/

That and he's a fucking moron I was being nice.

I say that, but I have this simple scarf rack I am making for my gf that I have yet to finish because I can't find my damn harbor freight drill. All I am doing is routing some edges on a couple pieces of wood, staining them, adding these decorative knobs to one and nice 90 degree brackets to the other and I've been on this project for 6 months lol

Hell, I just need to build something. I'm getting tired of not having time for projects.

http://www.madisoundspeakerstore.com/approx-3-fullrange/aurasound-ns3-193-8a1-3-black-cone-wide-range/ I need to make something with these.

I didn't forget, but I rarely have time to go outside the h0p unfortunately, let alone another forum. I know that overall the average intelligence of a thread on SSA has decreased (unfortunately) but I do miss reading useful information on sound deadening, sq, active installs, etc... I'm still so new to Home Audio that if there was a team like there was here when I joined in 2007 who is as knowledgeable in home audio, as those guys were with car audio I would be all over it and try to soak up information like a sponge. The only super active member there is Alan and his sentence structure kills me lol.

Stefan, I've been trying to make that protein fluff, but I'm too poor to go buy some casein right now, so I've been trying to use egg whites to help it out and I've been getting pwned by it. I have one more attempt I'm going to do tomorrow and if it doesn't work I guess I get some Casein next paycheck.

Some pics and link to the thread http://forums.androi...-phone.html#anb

Work on anything else? Interested... Theoretically you could make it work on anything but it would take some trial and knowledge of how t disassemble your phone. On the Galaxy Nexus you can take the back of the phone off (not the battery cover) relatively easy. You apply some copper tape to the pogo pins and run it out and reinstall the back of the phone . You then apply the pre charger and some more copper tape to the battery cover that allows the connection to be completed when it is reinstalled. Apply to the touchstone and viola.