MKader17

lol thanks typing>me today by the way maybe you should check your spelling

Well I got everything installed and started listening and I'm very disappointed. First I tried listening to it on my parents home theater. But the little Bose sub (or whatever it is) was over powering it. Took it into my room and hooked it up to my old school panasonic boom box/stereo (with subwoofer out) and it seemed it was working better, but even with the gains up a little over 3/4 and the volume nearly maxed out you could hear it better but you couldn't even feel it. Lets just say the bass it was putting out wasn't overwhelming the crappy 3" w/ tweet mains on the stereo. So far I don't know what to say, maybe it will get a better signal from my preamp when I hook it up with the BIB's. Or maybe the 150W @ 8 ohms won't be enough and I'm going to have to find a sub I can run at 4 ohms... I don't think its possible to have anything wired wrong, but I guess I'll throw it out there. The speaker wires come from the amp directly to the inside of the box and I have it in series @ 8 ohms....

I abused my mod status and edited your post. I changed substage to sub setup. There is no such thing as a substage. lmao well I went ahead and changed the title as well Change daytown to dayton:) lmao in my defense I do live in Baytown

I abused my mod status and edited your post. I changed substage to sub setup. There is no such thing as a substage. lmao well I went ahead and changed the title as well

I was under the impression that Shelac and Deft were the same thing but maybe not. I'll have to look into veneer as well

*Late Night Update* The Box on the "painting stool" Maybe this explains it better. I also have the ability to rotate the box, which is pretty cool After the first coat. It really doesn't look this bad in person Second coat. Looking better but I might have to do something else. I'm thinking trim on the edges of the box stained like the BIB's Thats it for tonight. Tomorrow its time to add the woofer and the amp and test it out

U-Bolts for the 1/2 drop on my truck came in

Gah, I wish.... That is me, and my house, but its my Mom's co-workers bike. He had to leave it at our house for the evening. But oddly he lives walking distance from my dorm room. He actually just came and picked it up while I was typing this message

Build Log is up! http://www.soundsolutionsaudio.com/forum/i...showtopic=21004 Enjoy...

http://www.soundsolutionsaudio.com/forum/i...showtopic=21004 Build Log Up!

Got my dayton plate amp in so I started building the box today. This is the sub setup for my 4.5" BIB's that will be in my dorm. The box will be black, with the black sub and black plate amp, so I have nicknamed it Stealth. Got to start every bo build with this^^^ Actually some of the dimensions are wrong Driver: Mach 5 MAW-10 (Sadly a discontinued driver) Amp: Dayton 240W Plate amp (Will be running 150W @ 8ohms) And The Build.... Dry Fit... First time to use the new Jasper Jig Travis (aka - TMAX98) drawing up the center. Jasper Jig = Perfection Glued, Finish nailed and Clamped More pics to come tonight. I have already put on 2 coats of Shelac and one coat of black paint. It won't be the prettiest but it will hardly ever be seen. And sorry Sean, no double baffle

Yeah, Building a box became more fun than fixing other shit. Did conclude that I got a bad tune from Nelson (the tune didn't go through) might evacuate within an hour of Nelson so may go visit him on Tuesday and get everything cleared up

This hurricane is going to rock Louisiana once again

Relay T0PPAGE

How do i test if a relay is working properly?

Link

for audio in The Z 85' of 1/0 there (35' is for Travis) Knu 4 gauge vs Welding Wire 1/0. Not as big of a difference as I expected

Rockstar = wired

What ever I build they will keep because Dad will be paying for it I'll just be free labor. I think about $450 for Drivers and crossover components. No active is not possible I have 2 channels to work with and thats it

Since I'm already whoring it up. The MAW-10 is such a sexy driver and I can't believe they stopped making them. Hopefully will have a box made for it soon

Blose T0P!

I really can't wait to show my dad how his Bose really is Blose

Dad just got a new LG Flat screen, and now I'm pushing really hard to get him to let me build some new speakers I got 80W at 6 ohms to work with, what would you guys recommend? http://zaphaudio.com/audio-speaker16.html http://zaphaudio.com/Waveguidetmm.html These 2 have caught my eye. The second because of the nice drivers and the super simple crossover design

Michael Phelps at a young age!