MKader17

Don't really care to get up but should be a fun trip

Have to be up in 7.5 hours and drive to San Antonio

DeadT0P!!!

Did I friggen kill teh hop?

^ Just not tonight!

"Addicted to a memory" Sometimes that fits me so well

Oh yeah, its a rice killer too =)

was a 302 stroked to 330 (or something like that) Now he has a 406 in it and a drag style shifter (straight forward and back)

good to know my camera was taking shitty pictures that evening Editted fore more pics:

Definitely... <---- would so own a RWD econobox/k-car/subcompact if they ever sold a decent one stateside.... 1st or 2nd gen Nova? Or the original, the Ford Falcon. My friend has a Ford Falcon. Such a lovely car. I think I have pics of it somewhere

T0P

Was that directed towards me or yourself? lol

Going off of DevilDrivers post... Rear wheel drive give you control over both sets of tires. In a FWD car when the rear tires lose traction you are pretty much screwed as you have no way to control them IMO. I will always prefer RWD. I've driven some front wheel drives that could really take some decent turns, but then again I've never really driven any good RWD car. Come to think of it, the only RWD car I can remember driving atm was a 69 Caddilac El Dorado, "Le Rex de Angulus" <--The king of the corners and a V6 Camaro

Deadening Thread http://www.soundsolutionsaudio.com/forum/i...showtopic=15494

Here goes to the start of deadening my 02 Z71. Lots of deadening going in. 155 Sq ft. Raammat 5 or 6 Yards Ensolite 5 gallons and 1 quart of Spectrum GM's way of trying to stop you from removing the rear bolts on the front seats an 11mm 12 point did the trick. Also the front nuts on the front seat are removable with 15mm 12 point. Carpet is not so clean lol When I saw this clip for the first time I thought "I'll come at you like a spider monkey!" The rear light needs to be removed before dropping the headliner to disconnect the light More pics to come

Taking a break from working in the shop. Painting the Shellac and the MDF portion of the BIB's was a pain in the ass. It was soaking that stuff up like crazy. Got The Z completely stripped and a "1.5" layers on the outer door panel. (1.5 means an entire layer then another layer of the places more prone to resonating.

I have one of these for when I am in the charcoal mood. http://www.vikingrange.com/consumer/produc...jsp?id=cat70145 Fogo and Murrays, so you are in Minny eh? Oh, don't leave out Manny's. Those things are uber nice

Its on FSC I'll post it here in a moment

So GM decided to glue there wires to the headliner instead of to the roof. So I literally had a knife and was skinning the wires away much like you would a deer. Good thing is I got everything out of the truck Bad news is you get no pics until tomorrow morning

Updated Again! http://www.soundsolutionsaudio.com/forum/i...mp;#entry349624

Mo PicTas Polyfil! Some router edging I did. A little burning but it gives it character Baffles. I cut the outside with a jig I made and the inside with a jigsaw The Circle Jig I made

T0PPAGE

jigsaw with a fine tooth blade with speed jsut fast enough to cut. too fast and it remelts back together wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee lol yeah that happenned I just cut it all and started swinging and ended up breaking it off

What the best way to cut plexi when you are cutting curves?

can you buy router jigs at local stores?