EPerez

I had an audiopipe before my crescendo bc2000 and i didnt like it. How much do u have to spend?

I've heard those were pretty good.

I thought the audiopipes got real hot too like realfish said. I bought a crescendo bc2000 and I love it. It stays cools and it seems pretty effiecient. I think bc2k would be perfect for you.

Pretty sure he's talking about something like this. http://www.radioshack.com/product/index.jsp?productId=3449316 Plug I pod into the stereo cable and then plug the rca's in the amp, then play using the ipod, not headunit. I realized what he meant just before you sent that haha but yea i tried that and the bass hit like it supposed too! So is there something wrong with the rcas?

What do you mean?

If my rcas are bad will I hear any bass or will no bass be heard?

I dont think i have that?

Disconnect rcas from amp? and also how would I run something else? How do i hook it up?

Sounds the same even with one.

Which connections? Wiring from amp to subs/box?

Have you checked out singer alts from mike singer? Prices are less expesive than both and are great from what I've HEARD. I haven't used any of the 3 but I will most likely be getting a singer alt for my trailblazer. He has lifetime warranty.

Yea the comps r in a ported box and the jls are in a sealed. The jls worked before but when I put both in the same sound is with both boxes and subs.

I jus bought 2 kicker comps 12s jus to have till i get my 21 in and when I put them in they sounded hollow and wouldn't play right. I had my friends jls in my car 2 days ago and they worked totally fine. I didn't change anything except put subs in. I called crescendo to see if my amp had blown and he said it must be a signal messed up somehow. The subs I know work becaise we hooked both sets in my friends car and they worked fine in his. What could be the problem?

I'll jus buy another bc2k then and strap it at 2 ohms. I know I dont have the electrical for .5 ohms strapped lol. Thanks for the help guys!

I recently bought a warden 21 and its a d1 so I would have to wire my crescendo bc2k to 2 ohms or .5 ohm. Itd be ridiculous to put 1100 rms to a warden haha but also I don't wanna run my amp at .5. So what I was thinkin is buying 2 amps and strapping them at 2 ohms. Should I buy another bc2k or sell mine and buy 2 used sundown saz1500s? Do you think theres a big difference between the two? My electric consist of big 3, deka 9a31 as second batt with all 0 gauge. I know I don't have the electrical for it full tilt but its a safer option so I would be running at at least 2500 rms I'm also in the process of getting a HO alt, possibly from singer. Please explain why you would choose whatever you would do. Thank you very much..

Good luck buying it! Mr. Bojangles is great to deal with. I should be receiving it on tuesday. I Cant wait to have the beast.

Is there anyone that will do them for free?

I just bought a used 21" warden from Mr. Bojangles. He's got 1 left still. I'm going to need help designing a box. I have an 03 trailblazer lt that its going in. I also have a crescendo bc2k that I'm gonna run at 2ohms because the sub is a D1 until I get a xs 3100 then ill drop it down to .5 ohm. I'll have a deka 9a31 up front and the 3100 in the back. I have the big 3 and a stock 150 amp alt. My max dimensions are 44w x 27d x 21h. Warden Series 21 Sealed Not Recommended Ported 7.5 cubes - 10.0 cubes, 90 - 160 Inches of Port, 32-37 Hz Average: 8.5 cubes, 120 inches, 32-37 Hz If someone can draw up a design that would be great. Whatever size box you think is best ill go with that and also I was thinking around 33-34hz tuning. Also I think sub up/port back is best for daily right? This is going to he just a daily driver with no competing at all. I listen to rap and hip hop. If there are any questions please ask. Thank you very much!

You need to measure out ur trunks dimensions. Find out the opening of trunk and see how big of a box you can fit thru there. Reply with info on what your system consist of and the dimesions in height, width and depth. Explain your listening goals, types of music and what type of box. This info will allow someone to help you design the right box.

I noticed this too when i switched my 15 hdc3 to my trailblazer from my 300m. My 300ms windshield, mirror and the my roof towards the front would flex like crazy bit in my tb they would barely move. I even have more power on it in my tb. This is y I laugh when people say shyt sucks because it doesn't flex everything.

Um aren't the ssds 600 rms? I know they will take a little more power but a 2400 per ssd I don't think is too smart. Why not get 2 btls if you plan on doing that? Unless you have a budget but still a brz2400 would be good for the pair. Nope 1000rms each. He also needs to get dual 1 ohm voice coils if you want to stay with one amp. What is this going in? Oh I didn't know that but yea dual 1s for 1 amp. That will give you 1200rms each.They will be loud depending on the box and type of vehicle. Correct but the OP said he wanted to add another brz2400 and I don't think he needs that.

Um aren't the ssds 600 rms? I know they will take a little more power but a 2400 per ssd I don't think is too smart. Why not get 2 btls if you plan on doing that? Unless you have a budget but still a brz2400 would be good for the pair. Nope 1000rms each. He also needs to get dual 1 ohm voice coils if you want to stay with one amp. What is this going in? Oh I didn't know that but yea dual 1s for 1 amp.

Um aren't the ssds 600 rms? I know they will take a little more power but a 2400 per ssd I don't think is too smart. Why not get 2 btls if you plan on doing that? Unless you have a budget but still a brz2400 would be good for the pair.

the clipping indicator is bullshit. no one should be relying on it. OP, if you want to save some cash then buy used. How is it bullshit? Does it not read accurately? And I don't rely on just that.

1000 rms, are you buying the q's or bl's? Well get 2 D1s (1 ohm dvc) if you want to run them at 1 or 4 ohms or get 2 D2s (2 ohm dvc) if you want to run them at .5 or 2 ohms. I suggest getting 2 D1s and running at 1 ohm on amp.