Everything posted by EPerez
-
Sub/amp question
You must of had the settings wrong on the amp and/or box was shitty. I guess ssa underrated their subs if you want to say since they are proven to take a shit ton more power than their rated but in reality it's not needed AT ALL. When I said just because it's rated for 1000rms at 1 ohms doesn't mean it has to or will always put out that much at 1 ohm. Honestly who gives a fuck if its underrated by 30% lol for a daily setup you wouldn't hear 1000rms from 1300rms. Why can you only go with one? What's the reason for that? Any failure of the sub is always user error either by setting things up wrong or not knowing the signs of the subs stressing like mentioned above. It you can manage both of those you will never have a sub fail on you.
-
Sub/amp question
It doesn't matter if you have a 10k rms amp on them. Just set the gain to right before you hear the sub stress. You will be fine with that amp. Just because its rated for what it is doesn't mean it will put out that much power. Like I said make sure you use your senses to know when the subs are being pushed to hard (listen for distortion, smell coil). I would suggest a new box though. That way it's made exclusively for you dcons. If you need a box design I can definitely help you with that. Then if you or someone you know can build it.
-
F/S ARCHOS 604 Wi-Fi
Anyone? Offer up somethin! I just want it gone by this point lol
-
Best way to seal off this trunk.
Very true! That's why I am facing it forward and "sealing it off"
-
Hey All
Welcome to ssa! You will learn a lot here if you listen and are open.
- New Guy from Kansas City
-
Apology
Your first post should of been in the new member sign in section regardless.
-
Xplicit Audio - New Company
I doubt a lot of the companies affiliated with ssa like the ones in the ssa store would not join.
-
Best way to seal off this trunk.
That's what I was getting at.
-
Box for 2 fi q 10's
Yea I know they will fit for sure but it'll allow you to have more room for other things you want to use your trunk for though. Just post them or you can txt me 810-986-0992 and let me know that way too.
-
Box for 2 fi q 10's
Ok that's fine. Need to know your max dimensions before I can begin.
-
Box for 2 fi q 10's
I would do ported then. You will for sure get louder but it's up to you so if you want to do sealed we can do that.
-
Best way to seal off this trunk.
Isn't it okay to make side and top panels and then just stuff some blankets behind that if its for daily? Just wondering for me. You said you wanted to completely seal it though.
-
Box for 2 fi q 10's
What are you max dimensions? How come your not going ported? Is it the high qts q's?
-
Box for 2 fi q 10's
I can do this for you if you like. No need to pay.
-
Installation question
Haha no problem man. That's always the first thing to check is the wiring like that and also the ground as well when things Aren't working. Its easy to make mistakes like that. everyones done it lol Glad they're working now.
-
Installation question
I think they should still play but could be out of phase. That's what I would check first.
-
Installation question
Sounds like the wiring of the subs is messed up somewhere. Check again to make sure. I know you probably think they are wired right, but sometimes you skip over it. Happens all the time. The wiring inside of the box I mean.
-
Installation question
I'll check them out, but it'd be easier for people to see right in the thread if you upload them to photobucket and then direct link them into here with the image button up above when your typing.
-
Installation question
http://www.the12volt.com/caraudio/woofer_configurationsm.asp Use this to make sure it's wired up correctly.
-
setup help
Build a good box with your equipment and you might be able to be louder. 2 totally different systems with you and your friend.
-
DD1 near Orange County CA??
He is talking about burping it. So I assume he is competing with a burp. you could never run it daily on 2,000 wrms. Gotcha, I though he was saying that he wanted it to run it that much but with a clean signal. But he is also talking about clean power. So I dont know why you need clean power to burp a sub. Yea true lol
-
setup help
Then with those amps and the subs in the right box should be easy to get pretty loud. Getting louder than anyone you know depends on who you know? Who's system do you want to be louder than? At this moment it's all in the install/box.
-
setup help
Lol ohh well use "deep bass" then because db is refered to as decibals. That's what I thought you were talking about. So what are you actually wanting to accomplish with this system? I know you said you wanted to compete, but all I'm getting is that you want is louder.
-
DD1 near Orange County CA??
He is talking about burping it. So I assume he is competing with a burp. you could never run it daily on 2,000 wrms. Gotcha, I though he was saying that he wanted it to run it that much but with a clean signal.