EPerez

That's crazy how you got all that in there lol aren't the trunks really small? Can't wait to see the btl reconed setup!

I would put all 4 subs on one side and have the port on the other.

Can you put it to the side then? You should have at least 190 in2 port area. That's for 30hz.

I'd do 2.5 cubes per 12 tuned to like 28 hz if you want hair tricks!

Why do you want to know that? It looks to be about 8" or so.

The lower the tuning the longer it needs to be.

^^That's what I was just gonna say lol

Could of swore he said it was a 15. My bad. Sean is right, it'll be a difference.

I love the lows too and I'm tuned to 32hz. I like a lot of te decaf music because it has a lot of the lows I like (28-35). With my Zcon in a bigger box tuned to 32 hz I hit them like crazy. I also get the upper bass pretty good as well. Tuning below 30 hz would really cut off the upper bass. If I were you I would tune to 30-32. I'm sure someone can help you actually get the design of it. I'm not really sure how to do it if you have two square ports.

I'd get a d5100 (I think that's the right one) or a d3400 for upfront. Then a d3100 in the back if you plan to upgrade later on otherwise just do a d3400. Look into diehard platinums. They're great batts and a little bit cheaper than xs power. I have the platinum g31 in the back and it's very powerful.

I'd say 90-110 in2 of port area would work just fine. Are you sure you want tuning that low? How come? Also why do you want 2 square ports?

Try one d3400 first. See how your electrical is then. Or do one d3100 if you plant to upgrade and can always add more.

How much power are you using and what's your tuning going to be?

I'm going to computer lab after class in a min and ill let you know around how much port area you should have.

I'm not sure how to do it but 2 8x8 ports is not even close to the size of 1 16x16 port. 2 8x8s is 128in2 1 16x16 is 256in2

Ill be tuned in for this one! Ohh btw I have a c1100.4 for sale never used. Also 2 10 crescendo pwx mids which were never used too. Let me know if your interested.

Bump!

yea i did, well i told them what was the guy said. It was a phone call from ups not an email. but i gave them the tracking info so they can verify with ups about it...Yea they would be able to see. After they see the email they will probably figure something out.

I'm guessing you showed them that email?

Bump!

Yea it sucks when things like this happen. It happened with crescendo and I. Luckily navid is a good guy and sent me a brand new amp! Great CS

If you just take your time ad make sure the measurements for the holes are going to be lined up ten you will be fine. I have had no problems. I always flush mount my subs so I'm not sure how it'd work when they are glued together.

I always cut both holes and then glue them together.

Did it say who signed for it? Maybe that person would know where it was placed.

Car looks really nice!! Tint that windshield