no_username

Only ricers wash their engines

I didnt have gain turned up enough for the decimal point to move over God im an idiot LOL

Nvm i got it. I over complicate things

Wall socket voltage reads 124.4

i cant set the range. Its ranged for 500v

http://www.extech.com/instruments/product.asp?catid=49&prodid=291 idk if its scewed up but its shows DC with the 00.00 then if i select AC it goes to 0.000

Yeah battery is good as its new Gain is at lowest right now. However even when i turn to ac volts it starts off as 0.000 instead of 00.00 im using volume 25/35 yes 50hz 0db

So i need to set my gain to 24.49v My multimeter is in AC volts mode and its only reading like .200v... Ugh???

Well sanding my hand is a pain in the ol geezer. Hitting up lowes tomorrow for a sanding block and some rough grit paper. Good idea, kind of what i was thinking phi

I am as we speak. Have to do it by hand, dont have a sanding block Pics when im done

Yeah i was thinking about sanding, all i have is emery cloth. Will shall see how that works ;-) Is the dia on the xcon 9.25?

So the DIA is 9.25 my box dia is 9.25 but the dcon bars stick out just a tad to far to where it wont fully be inserted into the box. Now i have to get a rubber mallet and something soft to pound it in to fit. I dont know if this is normal but i thought id put it out there

Here is a well written guide on setting gain http://slumz.boxden.com/f359/guide-tuning-amp-916831/ Sticky?

My speakers arnt even connected to my amp

I hope not

Thanks for helping me pm! Truly appreciate it

Got everything all working!!! They sound mmmm mazing!!!! Wish i had got 12s though time to fine tune the amp But boy o boy im happy!!"

Well the 9v test passed as the cones moved Going to buy more wire and do a better wiring job. Have a feeling some wires werent making contact

Ok so i checked the ohms One vc reads 3.6 The other only reads 2.9-3.1 Faulty sub?

Ok so i got it wired up. Now only one sub is working <.> God dangit this just cant be easy can it its the alpine cde122

I take that back. Plugged my hu rca back in and the bass is going at 2 ohms. Time to hook it all back up!!! Pm youve been a been help. Thanks a ton!!! Report back after im done

Sub setting is on. Eq at flat Plugged in my rca and no sound. So eithet faulty rca or bad rca jacks on hu. Any way to test it?

well if i set my sub volume to +15 shouldnt they be on?

Wrong headunit setting? God i hope its not a bad headunit. Everything works <.>

Well i have good news. The sub has bass! So bad rca wire? Anything else i should do before i rewire subs and bolt them in?