frogcase2002

Hes talking about dual 1 ohm Subs. . If each sub Is wired In Series then each sub will be wired at 2 at the amp In Parallel to make It 1 ohm

Yea you wire the pos. From one coil to the neg. Of the other coil then the remaining pos. And neg. You wire to the amp

Was hard to get good pictures of the front of the wall . . Ill try to get some videos up soon

Ended up finding a deal on 2 2500s

Thats what I ended up using

every subwoofer needs a specific enclosure. The right size, port tuning and everything. Needs to be designed for the subwoofers. . You dont want to just go buy a pre made enclosure

You will forsure need to have an enclosure built or build one your self to the specs of the subwoofers. The right enclosure makes all the difference

Ill try to get some pictures up soon. Got it playing

Dam thats a huge port. What is it like 18 inches

Whi Which ones do you have in stock now?

Order number was 15266

When will you have the let the bass drop shirts. One was ordered for me for Christmas and havnt heard anything about it yet. . She said you guys said it was out of stock and if she wanted an evil shirt and she said she will wait for the let the bass drop one. Just wondering if there going to be back in stock

Why dont you test to see if there is alot of voltage drop?

Got some work done today

Tested all coils on an amp today . Moving good

Measure volts at front and rear while playing loud. But if you already have the wire you mite as well run it

Think im only doing one layer of mdf but baffle will be 3 or 4 and good bracing inside and 2 by 4s all around the outside

Started on the enclosure

Anyone got any recommendations for good screws for screwing the subs down

Dust caps on and all coils reading 1.8