lilsoccersully

i currently have two planet audio bb2400.1 strapped at 1 ohm a mechman 320 alt 2 runs of 2/0 welding cable (power) 2 runs of 1/0 car audio wire scosche(ground) h/u is a alpine 123 ill pull up some pics righ now just have to run out side

hey guys i have a quick question i recently built a box for two zcon 12 inch subs. it consists of a single 6 inch aero tuned to 37 hz only 9 inches depth in a enclosure 5.46 after sub displacement it seems like the sub closest to the port is unloading or sounds Blown at frequencies higher then 40 hz but the one on the left doesn't do this.. could it be the encloser is causing the sub to unload and sound distorted? i had designed a different box which would be a slot port with these specs gross volume 6.98 ft^3 port volume : 1.43ft^3 physical port length 20.00" port bends : no Baffle displacement : 0.19ft^3 port area range 60-80in^2 port area 81in^2 port area per ft: 16.27in^2 net volume : 4.98ft^3 tuning frequency : 37.05 hz 2 common port walls woofer disp. : .38

well for some reason it wont let me sign in with face book for like 3 days now not sure why.. but on to the subs.. i put them in the box tuned it to 29 and it sounds good on really really slowed down stuff but not what i expected so i tuned it to 35 ish and it just sounds like poop it just sounds like the subs are blown at higher frequencies soo its get a bigger port 8-10 inch aero 8-10inch orr just pretty much i think a new box is going be going in ... the spec are: 5.07 cf after displacements tune will be 37 hz port area will be driver side 15.98 per cf 81 total sq inches ill have a google sketch up once i get around to drawing it any input is always appreciated