crazyder

I don't see how you could run them for only 2 weeks and have them look like this, unless he lives in a sand pit.

Why in the world are you sending 300 watts to something that only recommends 100 watts? That is probably why they are distorting. How sealed are your doors? Johnecohn2001 is right you are asking about midbass, despite what your previous subs did, anything over 65hz your subs should not be the key to.

Depends on what you mean by disappointed, 1175 watts is just fine if not way overboard if you are actually looking for a SQ system, I push 600 watts to a sealed Q10 and it is plenty loud for me. There is no need to go to a bigger amp, but the sub could handle more, but you would have to have BP option, gains set right, clean power,etc...but again there is no need unless you just want it louder and if you want louder well there are other FI subs for that. As far as sound quality goes, as long as it is in a correct enclosure it keeps up with even the most technical bass and it stays fairly flat along the frequency's. Overall, I would tell you, you are fine with your amp, might consider the BP option just to be safe and it might still be free too, build the right sized box and you will be more than happy with the results.

Did you make the order from the website? Since you are outside North America, you can't go through the website. From another thread just searching...

I will agree with that, both my Miniliths have been in for repair for over a month now, I am trying to be patient, but I miss my sub.

You cannot have the BL's sealed, so if you wanted a BL it would have to be the one ported.

and remember that is business days, so a week and a half to two weeks.

Have you checked to see if the sub is vibrating when there is no music? By that I mean turn everything on and just feel the cone, maybe the sub is motorboating from something wrong with the amp.

Yeah they did, new address: 743 Cochran St. Suite D Simi Valley, CA 93065 and because of the move they are 2 weeks behind schedule if you need anything repaired.

FI Car Audio 516 Bachelor Button St. Las Vegas, NV 89138

Yeah I think people misinterpreted me, I got that all figured out. Here is some porn for everyone, blurry porn

The options for the subs are all posted in the technical section they are pretty explanatory, then all you have to go to Fi's website and order it. With all the subs Fi builds I doubt they know of who got what options on which order to specifically help you out based on how it sounded and what options the sub might have had.

Considering it is Thanksgiving weekend I doubt you'll get much of a response.

What did you exactly question them on? Did you ask if you ever saw a package car that day? It could just be the driver that stole it or inside company, but if any of the neighboring businesses saw a package car that day, you could at least figure it might of been delivered. Only reason I ask is because a driver isn't going to give you the box say here sign it and then have someone stare at the box to get the last name and sign it. For me at least they have me sign the DIAD first, so it seems to me like whoever signed for it at least knew your last name. My guess on part of the tracer is the DIAD is also equipped with gps so they can download the drivers route and see if he actually stopped by place of business.

Well unfortunately you bought the wrong brand But take a look at this thread of a nice looking Chevy

What happened, they just forget to renew the domain?

I think I saw in one of the other threads that they are at SEMA right now.

im definitly interested in a few items to help horsepower......i mean it dont feel any different with 4 alts then it did with 2 but i could always use extra power. Electric fan is definitly in the question......watsup with this tune you speak of, i have the crap hypertech but i want the real deal. Can i use both? I AT LEAST need the hypertech to adjust the 26's to my speedo.....thats probably the best thing about it Instead of a plug in tune like a hypertech which does minimal tunning, you get a modded PCM that replaces the factory PCM. You just tell the tuners what you are looking to get out of it and they can adjust pretty much anything. some web sites; Wheatley Wait4me Nelson Performance

Might want to repost this in the General Fi section instead of here in technical, the mods seem to read and answer more in that section. or you could always try to e-mail Scott again and see if he responds.

I am using a Dual 1 Ohm Fi Q that I want to wire up to a 2 Ohm load so I can have 1200 watts available, bridging two minilith. So I would wire in series. amp + to sub + amp - to sub - sub + to sub - However I am looking at the manual and it shows the two amps bridged and the picture show the negative terminals are to only connect to each other with the positives terminals going to the amp. amp + to sub amp - to slave amp - (interconnect ground) slave amp + to sub So how am I supposed to wire this? Am I to assume that since it is bridged, that the slave amp + is now the - and hook it up that way? Thanks for the help!

Yeah, if the specs for the Fi X could be put back up that would be great.

What the other folks are telling you is you can't compare the efficiency of the woofers unless you give how much power you are going to give the line-up of woofers. Straight up the SSD cannot handle 2000 watts it would more than likely blow, the BTL however would probably be fine, so in that test the BTL would be the more efficient. But if you drop the power to 500 watts well then the BTL and the SSD would both work, but the SSD would be more efficient. Unless you give a power rating at which all four could then be compared, you are just comparing apples to oranges.

This may seem like a really dumb question but can these amps be mounted sideways without heat buildup issues? With the Draconia sold out, as well as other brands of amps slowly fading out of my mind, I am leaning on a 2x Minilith, Gladius BB, Duece BB combination that would just about take all the space on the back wall of my regular cab Silverado, forcing me to take the middle jump seat out and put my 10" Fi Q there. Or build some amp rack where they would be semi stacked (not one on top of the other, but close) or maybe some slanted shelf on to one side and sub box on the other. Either way they would be mounted sideways.

I imagine it is very similar to the Fi X, though never heard a lot of reviews on it.

Well first thing you should do is file a claim with UPS.